Hi florian..
Florian Overkamp wrote:
Hi,
-----Original Message-----
- Sometimes a call won't go through, dialtone stays on after
keypresses.
Strange. A powercycle of the iaxy usually helps
Are you changing which phone is plugged into the iaxy before
this happens? The changing of resistance levels I have
noticed to cause this occasionally.
Nope, no changes in the phone connection.
By the way, what does this mean:
-- Accepted AUTHENTICATED TBD call from <ip>
that means that the iaxy has authenticated to * to make a call, but has
not yet sent digits. This is normal activity.
- No support for hookflash transfers (will this be possible ??)
There is most definately support for flashhook transfers.
Hit Flash, then #, then dial the number you're' transferring
to. I've done this for awhile now, and it works fine.
Can you show your IAXy provisioning config ? This doesn't do anything with
my setup.
The provisioning config has nothing to do with this.
Make sure you're running revision 14 of the firmware. type
iax2 show firmware from the cli to see which firmware you
have on your asterisk
system. If it's not the latest, i reccomend doing a cvs update to
latest -HEAD . If you're not running HEAD this is futile.
Also, to see which version of firmware you have on the iaxy,
do an iax2 debug, and watch for the iaxy's talk, it will tell
you what firmware revision it's running.
I did, and I can confirm the IAXy is running version 14.
Florian
Okay. I'm not sure what to say then... I've been using an IAXy now
since the first batch was done, and it works exactly as I described.
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
