why not make * call straight to your cisco? in my implementation, i made * call sip straight to a 3640 and everything's ok
On Thu, 2004-04-15 at 01:42, Kyle Stone wrote: > I've got an Asterisk to H323 bridge working... but I'm having a few > problems.. > > I got everything working by setting up with the Asterisk box as a > gateway in CCM. > > I've got two issues.. > > 1. If I call off net.. (Asterisk -> CCM -> Cisco 5300(I think) -> PRI) > the calls will proceed.. connect, and I get about 4-5 seconds of RTP and > * tells me the remote end terminated my call. I look at my CCM CDR's > and the call had a zero length duration. > > 2. None of my calls seem to be registering a callerID from the Asterisk > box. > > > I can call *->CCM and stay on-net and everything works fine... > I can call from the CCM to * and everything works fine there... > > > Can anyone who has two way calling with H323 working between a CCM 3.X > and *, please advise me on the proper setting in CCM? I think it may be > in my CCM gateway setup. > > > > Kyle Stone > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
