Shawn,
Please describe your situation a little
better. I am experiencing what appears to be the same thing with a clone
card and am trying to gather data.
- Is
it a true Digium card or is it a clone/modem card?
- What
is the specific situation? Does the CLI show anything such as a
CallerID checksum error or no message regarding CID at all?
- Does
the card appear to function correctly other than Caller ID working?
Meetme and Music on Hold work properly?
- Did
it ever work? Did it work a few times then start giving errors or
did it never give a correct CID string?
As for where to start troubleshooting,
here are a few tips on things to try. Some I have tried in my situation,
some I have not.
- Make
sure that your Asterisk card is the only device plugged into the phone
line to eliminate other devices causing noise on the line
- Move
your card to a different PCI slot to see if the card is picking up RF noise
from another card.
- Play
with the rxgain and txgain values in Zapata.conf to see if the audio level
is just too low to support proper decoding
Please feel free to contact me off-list if
you prefer. I don’t think most people like to see clone card
discussions on the list, but there are a couple of people that are seeing the
same issue with a Digium card as well, so there is some interest on the list as
well.
Jeremy
From: shawn [mailto:[EMAIL PROTECTED]
Sent: Wednesday, April 14, 2004
5:31 AM
To: [EMAIL PROTECTED]
Subject: [Asterisk-Users] caller
id not working (zap)
Caller id works on any device but
asterisk. I have a zaptel
1 port card. any ideas on where I
should start.
|
