Hi! I just wondered if anyone would mine posting their successful jitter buffer settings here for me if they get a moment ??
I've spent a few hours trying to set the jitter buffer up reasonably logically and can definitely tell it makes a difference and can introduce latency and echo if setup incorrectly but I can't see a good post anywhere describing properly what the three settings actually really do or a typical range of settings for them. I do roughly understand how a jitter buffer is supposed to work. But can it help against echos heard on the lines or just the 'clicks' - are they jitter? Usually my cross-IAX latency is under about 35ms (commonly only 5-6ms) and SIP latency (I know this doesn't really matter as there's no buffer for SIP) as recorded by 'sip show peers' as about 70ms (but in reality ping I think is about half this). My current setup is : SIP and IAX clients --> my * --> providers via IAX (one 5ms away, one 80ms away) jitterbuffer=yes dropcount=5 maxjitterbuffer=100 maxexcessbuffer=45 If anyone can post any amplification on these settings apart from what's in iax.conf or their experiences or maybe some adjustments I should try that'd be really really helpful. Thanks!! Chris _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
