Hi, Glad that your problem was solved, but we are still exerpiencing a similar problem but our interrupts show:
0: 162034 XT-PIC timer 1: 234 XT-PIC keyboard 2: 0 XT-PIC cascade 5: 782 XT-PIC eth1 7: 7448 XT-PIC eth0 8: 1 XT-PIC rtc 10: 0 XT-PIC usb-ohci 11: 19330 XT-PIC ide0, ide1 12: 468 XT-PIC PS/2 Mouse 14: 0 XT-PIC ide2 15: 967550 XT-PIC t1xxp NMI: 1 ERR: 0 Any ideas? Tan -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: 10 April 2004 17:23 To: [EMAIL PROTECTED] Subject: Re: [Asterisk-Users] Zaptel/PRI problem To the list ... The problem appears to be fixed. Short answer: interrupts. When looking at cat /proc/interrupts it was seen that the wct1xxp card was sharing interrupts with a.o. the eth0 main ethernet driver. The solution we simple: move the T1 card to another PCI slot. Upon checking cat /proc/interrupts again, the card now had its very own interrupt. So far I have NOT seen any PRI notices or warnings. User experience has been limited due to a light workload on Friday, and, of course, this being Easter weekend. Since this is such a recurring problem (from witnessing list postings), perhaps digium should have a notice or something about this when they ship the cards out. Especially a relative newbie (first T1 on an asterisk box) like me is likely to even look at this interrupts situation. Especially when there are other issues (zaptel.conf and zapata.conf) to get a functional system. Maybe this deserves a wiki input. In any case, Happy Easter WW ----- Original Message Follows ----- > Dimitri, > I just got off the phone with digium. Here's what I (from > my notes) the event codes mean > Event 4: Alarm detected > Event 5: Alarm cleared > Event 6: Abort HDLC Frams > Event 8: Bad HCS > The 6 & 8 which occur sporadically are possibly causing > the observed symptoms. > Now ... what causes 6 & 8 is the question. > Interrupt conflicts was one suggested possibility. > Another possibility is 'stuff' from the Telco which is not > understood / mis-understood by the driver. > I'll keep the list posted. > Willy > > ----- Original Message Follows ----- > > Dear Willy > > i notice the same problem with my E100P using the latest cvs > > zaptel driver i have try every type of config in /etc/zaptel.conf > > to check if i have missed something in timing conf but nothing... > > Digium help... > > :-) thanks in advance Dimitri > > > > On Thursday 08 April 2004 23:07, [EMAIL PROTECTED] > > > wrote: Chris, > > > Thank you for posting this. Since it concerns my 'production' > > > system, let me comment. After 'downshifting' to a previous > > > release (for no good reason other than desperation and teh fact > > > that an earlier list entry had commented that it cleared up > > > the problems) I am sad to report that the system > > > failed again. Miscellaneous throughout the day: > > > Apr 8 13:41:27 WARNING[-1210639440]: PRI: Read on 32 > > > failed: Unknown error 500 > > > Apr 8 13:41:27 NOTICE[-1210639440]: PRI got event: 8 > > > on span 1 > > > Apr 8 13:41:27 WARNING[-1210639440]: PRI: Read on 32 > > > failed: Unknown error 500 > > > Apr 8 13:41:27 NOTICE[-1210639440]: PRI got event: 6 > > > on span 1 > > > Apr 8 13:42:07 WARNING[-1210639440]: PRI: Read on 32 > > > failed: Unknown error 500 > > > Apr 8 13:42:07 NOTICE[-1210639440]: PRI got event: 8 > > > on span 1 > > > Apr 8 16:44:01 WARNING[-1210631248]: PRI: Read on 34 > > > failed: Unknown error 500 > > > Apr 8 16:44:01 NOTICE[-1210631248]: PRI got event: 6 > > > on span 1 > > > Apr 8 16:44:01 WARNING[-1210631248]: PRI: Read on 34 > > > failed: Unknown error 500 > > > Apr 8 16:44:01 NOTICE[-1210631248]: PRI got event: 6 > > > on span 1 > > > > > > Then this -- possibly not related ? > > > > > > Apr 8 16:51:45 WARNING[-1137157200]: Maximum retries exceeded on > > > call [EMAIL PROTECTED] for seqno 102 (Request) > > > Apr 8 16:51:45 WARNING[-1137157200]: Maximum retries > > > exceeded on call [EMAIL PROTECTED] for > > > seqno 103 (Request) > > > Apr 8 16:51:45 WARNING[-1137157200]: Maximum retries > > > exceeded on call [EMAIL PROTECTED] for > > > seqno 104 (Request) > > > Apr 8 16:51:46 WARNING[-1137157200]: Maximum retries > > > exceeded on call [EMAIL PROTECTED] for > > > seqno 105 (Request) > > > > > > And finally, I'll show you a RESTART log > > > > > > Apr 8 17:41:32 WARNING[-1085030272]: Ignoring port > > > for now Apr 8 17:41:33 WARNING[-1085030272]: XXX I > > > don't work right with non-full duplex sound cards XXX > > > Apr 8 17:41:33 WARNING[-1189983312]: Read error on > > > sound device: Resource temporarily unavailable > > > Apr 8 17:41:33 ERROR[-1085030272]: Unable to load > > > config iax1.conf > > > Apr 8 17:41:38 NOTICE[-1221452880]: Alarm cleared on channel 1 > > > Apr 8 17:41:38 NOTICE[-1221452880]: Alarm cleared on > > > channel 2 > > > Apr 8 17:41:38 NOTICE[-1221452880]: Alarm cleared on > > > channel 3 > > > Apr 8 17:41:38 NOTICE[-1221452880]: Alarm cleared on > > > channel 4 > > > Apr 8 17:41:38 NOTICE[-1221452880]: Alarm cleared on > > > channel 5 > > > Apr 8 17:41:38 NOTICE[-1221452880]: Alarm cleared on > > > channel 6 > > > Apr 8 17:41:38 NOTICE[-1221452880]: Alarm cleared on > > > channel 7 > > > Apr 8 17:41:38 NOTICE[-1221452880]: Alarm cleared on > > > channel 8 > > > Apr 8 17:41:38 NOTICE[-1221452880]: Alarm cleared on > > > channel 9 > > > Apr 8 17:41:38 NOTICE[-1221452880]: Alarm cleared on > > > channel 10 > > > Apr 8 17:41:38 NOTICE[-1221452880]: Alarm cleared on > > > channel 11 > > > Apr 8 17:41:38 WARNING[-1210963024]: PRI: Read on 32 > > > failed: Unknown error 500 > > > Apr 8 17:41:38 NOTICE[-1210963024]: PRI got event: 5 > > > on span 1 > > > Apr 8 17:49:10 WARNING[-1221452880]: Detected alarm > > > on channel 1: Red Alarm > > > Apr 8 17:49:10 WARNING[-1221452880]: Detected alarm > > > on channel 2: Red Alarm > > > Apr 8 17:49:10 WARNING[-1221452880]: Detected alarm > > > on channel 3: Red Alarm > > > Apr 8 17:49:10 WARNING[-1221452880]: Detected alarm > > > on channel 4: Red Alarm > > > Apr 8 17:49:10 WARNING[-1221452880]: Detected alarm > > > on channel 5: Red Alarm > > > Apr 8 17:49:10 WARNING[-1221452880]: Detected alarm > > > on channel 6: Red Alarm > > > Apr 8 17:49:10 WARNING[-1221452880]: Detected alarm > > > on channel 7: Red Alarm > > > Apr 8 17:49:10 WARNING[-1221452880]: Detected alarm > > > on channel 8: Red Alarm > > > Apr 8 17:49:10 WARNING[-1221452880]: Detected alarm > > > on channel 9: Red Alarm > > > Apr 8 17:49:10 WARNING[-1221452880]: Detected alarm > > > on channel 10: Red Alarm > > > Apr 8 17:49:10 WARNING[-1221452880]: Detected alarm > > > on channel 11: Red Alarm > > > Apr 8 17:49:10 WARNING[-1210963024]: PRI: Read on 32 > > > failed: Unknown error 500 > > > Apr 8 17:49:10 NOTICE[-1210963024]: PRI got event: 4 > > > on span 1 > > > Apr 8 17:49:18 NOTICE[-1221452880]: Alarm cleared on > > > channel 1 > > > Apr 8 17:49:18 NOTICE[-1221452880]: Alarm cleared on > > > channel 2 > > > Apr 8 17:49:18 NOTICE[-1221452880]: Alarm cleared on > > > channel 3 > > > Apr 8 17:49:18 NOTICE[-1221452880]: Alarm cleared on > > > channel 4 > > > Apr 8 17:49:18 NOTICE[-1221452880]: Alarm cleared on > > > channel 5 > > > Apr 8 17:49:18 NOTICE[-1221452880]: Alarm cleared on > > > channel 6 > > > Apr 8 17:49:18 NOTICE[-1221452880]: Alarm cleared on > > > channel 7 > > > Apr 8 17:49:18 NOTICE[-1221452880]: Alarm cleared on > > > channel 8 > > > Apr 8 17:49:18 NOTICE[-1221452880]: Alarm cleared on > > > channel 9 > > > Apr 8 17:49:18 NOTICE[-1221452880]: Alarm cleared on > > > channel 10 > > > Apr 8 17:49:18 NOTICE[-1221452880]: Alarm cleared on > > > channel 11 > > > Apr 8 17:49:18 WARNING[-1210963024]: PRI: Read on 32 > > > failed: Unknown error 500 > > > Apr 8 17:49:18 NOTICE[-1210963024]: PRI got event: 5 > > > on span 1 > > > > > > Can someone PLEASE interpret these messages? > > > BTW: Calls & messages to digium support have gone > > unanswered > > > > :( > > > > > > TIA > > > Willy > > > > > > > > > ----- Original Message Follows ----- > > > > > > > Just a note to the list, this problem still seems to exist as > > > > late as 2004-04-07. > > > > > > > > Symptoms as we have seen it are this. System runs along just > > > > fine, no errors. At some random interval, not based upon time, > > > > and not apparently based upon call load, sound drops out on all > > > > calls made over the Zap (T1 PRI interface in our case > > > > T100P card). Any new calls made or received from > > > > this time forward have no sound. The problem is > > > > temporarily fixed by a shutdown and restart of the > > > asterisk code. > > > > > This will be a major issue for anyone who is > > > > installing or upgrading a system using a T1 card > > > > (our experience is with the single port digium card, but > > > > previous postings concerning this issue indicate the problem > > > > exists with the 4 port as > > > well). > > > > > A temporary work around has been to fall back to the CVS version > > > > 2004-03-05 10:28 for zaptel and asterisk. We've just upgraded > > > > (downgraded) from the current versions to the march 5th > > > > versions and will be watching to see if the problem goes away. > > > > > > > > Here are some of the error messages we are seeing: > > > > > > > > Apr 5 07:57:01 WARNING[-1200284752]: PRI: Read on > > > > 31 failed: Unknown error 500 Apr 5 07:57:01 > > > > NOTICE[-1200284752]: PRI got event: 8 on span 1 > > > > > > > > Apr 6 07:10:28 WARNING[-1200215120]: PRI: Read on > > > > 29 failed: Unknown error 500 Apr 6 07:10:28 > > > > NOTICE[-1200215120]: PRI got event: 5 on span 1 > > > > > > > > Apr 6 14:22:23 WARNING[-1200260176]: PRI: Read on > > > > 29 failed: Unknown error 500 Apr 6 14:22:23 > > > > NOTICE[-1200260176]: PRI got event: 6 on span 1 > > > > > > > > Apr 6 14:53:17 WARNING[-1200165968]: PRI: Read on > > > > 30 failed: Unknown error 500 Apr 6 14:53:17 > > > > NOTICE[-1200165968]: PRI got event: 5 on span 1 > > > > > > > > Apr 7 15:00:26 WARNING[-1210471504]: PRI: Read on > > > > 64 failed: Unknown error 500 Apr 7 15:00:26 > > > > NOTICE[-1210471504]: PRI got event: 5 on span 1 > > > > > > > > Apr 7 20:33:52 WARNING[-1210508368]: PRI: Read on > > > > 55 failed: Unknown error 500 Apr 7 20:33:52 > > > > NOTICE[-1210508368]: PRI got event: 8 on span 1 > > > > > > > > Apr 8 09:42:15 WARNING[-1210725456]: PRI: Read on > > > > 32 failed: Unknown error 500 Apr 8 09:42:15 > > > > NOTICE[-1210725456]: PRI got event: 5 on span 1 > > > > > > > > -Chris > > > > > > > > On 03:14 AM 3/30/2004, Tais M. Hansen wrote: >-----BEGIN PGP > > > > SIGNED MESSAGE----- > > > > >Hash: SHA1 > > > > > > > > > >Hi. > > > > > > > > > >I'm getting the following error at random > > > intervals on > > > > > my TE410P with Asterisk > > > > > > > > >CVS-03/30/04-11:49:01-CEST. > > > > > > > > > >I have two spans active, one connected to my Telco > > > , the > > > > > other to a Siemens > > > > > > > > >PABX. Both spans display this behavior at random > > > > > > > > intervals. > > > > > > > > >All calls are dropped when this happens. Spans are > > > not > > > > > necessarily in use when > > > > > > > > >this happens. > > > > > > > > > > > > > > >Mar 30 12:01:41 WARNING[81926]: chan_zap.c:6017 > > > > > > > > zt_pri_error: PRI: Read on 72 > > > > > > > > >failed: Unknown error 500 > > > > >Mar 30 12:01:41 NOTICE[81926]: chan_zap.c:6733 > > > > > > > > pri_dchannel: PRI got event: 4 > > > > > > > > <snip> > > > > > > > > _______________________________________________ > > > > Asterisk-Users mailing list [EMAIL PROTECTED] > > > > > > > > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > Willy Wouters > > > ypOne Publishing > > > > > > _______________________________________________ > > > Asterisk-Users mailing list > > > [EMAIL PROTECTED] > > > > > > > http://lists.digium.com/mailman/listinfo/asterisk-users To > > > UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > _______________________________________________ > > Asterisk-Users mailing list > > [EMAIL PROTECTED] > > http://lists.digium.com/mailman/listinfo/asterisk-users > > To UNSUBSCRIBE or update options visit: > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > Willy Wouters > ypOne Publishing > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users Willy Wouters ypOne Publishing _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
