Did
you install the micro filters that came with with your ADSL modem. Usually
you get 3-4 of these. They are used to protect your analog lines from the
additional signal noise from the ADSL signal.
-sb
Radio Shack item number 279-103 for about $15 each
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]On Behalf Of Oliver Wilcock
Sent: Thursday, April 08, 2004 10:30 AM
To: [EMAIL PROTECTED]
Subject: RE: [Asterisk-Users] dreaded Caller*ID failed checksum
Some input for those with bigger brains like, perhaps, Jeremy Hall, to ponder in relation to the Caller*ID failed checksum message.
1. I have a Digium X101P (and TDM420P)
2. I installed in January and had no problems with Caller ID
3. I played with Asterisk including a few CSV updates in February (stable 1.0, I think).
4. Then I had problems with Asterisk never reporting Caller ID to phones on the TMD420P and returning the "failed checksum" message sometimes.
5. I updated to Apri 4 CSV of zaptel and asterisk and now Caller ID works.
6. I have ADSL, which introduces noise on the line and I have an emergency phone which bypasses Asterisk (in case of power failure). That phone reports Caller ID without problems.
7. Now the X101P fails to detect hangups reliably, though I think it is more reliable than it was in March when I was using the stable code.
