On Mon, Aug 9, 2021 at 8:32 AM Jerry Geis <[email protected]> wrote:
> > > On Mon, Aug 9, 2021 at 8:11 AM Jerry Geis <[email protected]> wrote: > >> >> >> On Mon, Aug 9, 2021 at 7:57 AM Jerry Geis <[email protected]> wrote: >> >>> >>> >>> On Sun, Aug 8, 2021 at 3:18 PM Jerry Geis <[email protected]> wrote: >>> >>>> I am not using a SIP trunk as I normally do. >>>> >>>> I have an extensions 3382 setup that my server registers to the other >>>> SIP system. >>>> When the other system calls 3381 on my system I am getting this error: >>>> >>>> [Jul 27 10:08:50] WARNING[89791][C-00000068] chan_sip.c: username >>>> mismatch, have <3381>, digest has <8124> >>>> [Jul 27 10:08:50] NOTICE[89791][C-00000068] chan_sip.c: Failed to >>>> authenticate device "USCOL TEST" <sip:XXXX@IP>;tag=1c1947164290 for >>>> INVITE, code = -2 >>>> >>>> How I allow this ? I want to allow any SIP call to 3381. >>>> Using Astering 18.4.0 >>>> >>>> Thanks, >>>> >>>> Jerry >>>> >>> >>> Sure here it is: >>> [general](+) >>> register => 3382:XX@IP/3382 >>> >>> ; Description: Connection to PBX >>> [3382] >>> type=friend >>> defaultname=3382 >>> defaultuser=3382 >>> secret=XX >>> dtmfmode=RFC2833 >>> host=IP >>> description=Connection to PBX >>> context=incoming >>> rtptimeout=60 >>> rtpholdtimeout=60 >>> rtpkeepalive=60 >>> callerid=3382 >>> qualify=no >>> canreinvite=no >>> nat=never >>> disallow=all >>> allow=ulaw >>> allow=alaw >>> allow=gsm >>> >>> Thanks >>> Jerry >>> >>> >> > What's the association between 3381 and 3382? >> >> 3381 is the number they want to dial into my asterisk. 3382 is the >> registered extension to their system. >> >> Jerry >> >> >> >>> >>> >> > >You register as 3382. That means that if someone on their system dials > 3382, > >your Asterisk server gets the call. > > > I think at first I was only using 3381. That was the extension I > registered. There was no 3382. Something was going wrong there also. > (Might have been a similar error), > and I could not get that to work either. > > Jerry > Well my issue has changed now. I have dropped the 3382. Changed back to 3381. So I am registering 3381 to the other server. The other server is 10.35.229.5. My IP is 10.35.229.11. I have two network cards. 10.35.229.11 is Eth0 192.168.1.60 is Eth1 route looks OK route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth1 10.35.229.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1002 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1003 0 0 eth1 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 The issue is that the call comes in but the user hears no audio. There is any crazy networking going on - why would the user not hear audio ? Thanks Jerry
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- Check out the new Asterisk community forum at: https://community.asterisk.org/ New to Asterisk? Start here: https://wiki.asterisk.org/wiki/display/AST/Getting+Started asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
