Good day from Singapore,

I seem to have found the solution at FreePBX community forums. Please check out the following discussion thread.

Discussion Thread: Cisco 7940 registration problem RESOLVED
Link: https://community.freepbx.org/t/cisco-7940-registration-problem-resolved/30285

But I don't understand very well what users at this discussion thread are talking about. Can someone help me understand better after reading through the above discussion thread?

For your information, I am using PJSIP extension instead of CHAN_SIP extension.

I am planning to work on my Cisco 7960 IP phone registration problem this coming Christmas 2020 weekends.

Thank you very much for your kind assistance.




On 2020-12-21 09:58, Duncan Turnbull wrote:
Hi there

I would normally highlight the part but the email is so long I thought
I would just note what I can see

It appears the Cisco is downloading files.
None of the SIP traces show the IP of the phone of the extension

Your proxy is at 192.168.1.9
Your phone is at 192.168.1.130

These are the details you want the phone to pickup
line1_name: "1600"
line1_shortname: "TEO EN MING"
line1_displayname: "TURRITOPSIS DOHRNII TEO EN MING"
line1_authname: "1600"
line1_password: "IP Phone Extension Password"

 I don't see any registration attempts from your phone.

The first thing is to use the phone screen display to check if it
actually has picked up the settings.
To unlock the Cisco SIP IP phone, press **#

You can also telnet to the phone usually cisco as password, and look
at logs. Its quite possible some of your config files are not quite
right. If they were all wrong the Cisco would keep trying to TFTP the
files.

This is an old SIPDefault.cnf I used to use in NZ
================================================

; sip default configuration file
#Image Version
image_version:P0S3-08-6-00 ;
#Proxy server address
proxy1_address: 10.12.41.1 ;
proxy_register: 1;
logo_url: "http://10.12.41.1/Logo.bmp";                    ; URL for
branding logo to be used on phone display
time_format: 0 ;
preferred_codec: g711alaw ;
sntp_mode: unicast ;
dial_template: dialplan
sntp_server: 10.12.41.1 ;
messages_uri: "*97"
time_zone : NZST
dst_auto_adjust : 1
dst_offset : 01
dst_start_month : September
dst_start_day : 29
dst_start_time : 02:00
dst_stop_month : April
dst_stop_day : 6
dst_stop_time : 02:00
=================================================

This is a SIP Phone template - you can compare settings and notes on
the settings
# SIP Configuration Generic File (start)

=================================================
# Proxy Server
proxy1_address: "10.12.41.1"

# Line 1 Settings
line1_name: "EXTN"                     ; Line 1 Extension\User ID
line1_shortname: "0NXXXXXXX"           ; Line 1 Short Name
line1_displayname: "0NXXXXXXX"           ; Line 1 Display Name
line1_authname: "EXTN"         ; Line 1 Registration Authentication
line1_password: "6gs72ha9"         ; Line 1 Registration Password
phone_label: "Company Limited"    ; no effect on SIP messaging

# Line 2 Settings
line2_name: ""                          ; Line 2 Extension\User ID
line2_displayname: ""                   ; Line 2 Display Name
line2_authname: "UNPROVISIONED" ; Line 2 Registration Authentication
line2_password: "UNPROVISIONED"         ; Line 2 Registration Password

# Line 3 Settings
line3_name: ""                          ; Line 3 Extension\User ID
line3_displayname: ""                   ; Line 3 Display Name
line3_authname: "UNPROVISIONED" ; Line 3 Registration Authentication
line3_password: "UNPROVISIONED"         ; Line 3 Registration Password

# Line 4 Settings
line4_name: ""                          ; Line 4 Extension\User ID
line4_displayname: ""                   ; Line 4 Display Name
line4_authname: "UNPROVISIONED" ; Line 4 Registration Authentication
line4_password: "UNPROVISIONED"         ; Line 4 Registration Password

# Line 5 Settings
line5_name: ""                          ; Line 5 Extension\User ID
line5_displayname: ""                   ; Line 5 Display Name
line5_authname: "UNPROVISIONED" ; Line 5 Registration Authentication
line5_password: "UNPROVISIONED"         ; Line 5 Registration Password

# Line 6 Settings
line6_name: ""                          ; Line 6 Extension\User ID
line6_displayname: ""                   ; Line 6 Display Name
line6_authname: "UNPROVISIONE" ; Line 6 Registration Authentication
line6_password: "UNPROVISIONE"         ; Line 6 Registration Password

# Emergency Proxy info
proxy_emergency: ""
proxy_emergency_port: "5060"

# Backup Proxy info
proxy_backup: ""
proxy_backup_port: "5060"

# Outbound Proxy info
outbound_proxy: ""
outbound_proxy_port: "5060"

# NAT/Firewall Traversal
nat_enable: "0"
nat_address: ""
voip_control_port: "5060"
start_media_port: "10000"
end_media_port:  "20000"
nat_received_processing: "0"

# Phone Label (Text desired to be displayed in upper right corner)
phone_label: "Name's phone"            ; Has no effect on SIP messaging

# Time Zone phone will reside in
time_zone: NZST
time_format: "D/M/Ya"
# Telnet Level (enable or disable the ability to telnet into this phone
telnet_level: "2"      ; 0-Disabled (default), 1-Enabled, 2-Privileged

# Phone prompt/password for telnet/console session
phone_prompt: ""                              ; Telnet/Console Prompt
phone_password: "cisco" ; Telnet/Console Password

# Enable_VAD (1-enabled, 0-disabled)
enable_vad: "0"

# Network Media Type (auto, full100, full10, half100, half10)
network_media_type: "auto"
user_info: none

# URL for external Directory location
directory_url: "http://10.12.41.1/directory.html";
=================================================

I would then recommend tcpdump to monitor traffic coming from
192.168.1.130  Tcpdump is an important tool to learn to use and you
can look at all traffic coming from the phone, perhaps its using TCP
instead of UDP?

Have you got a copy of the Cisco SIP IP Phone 7960 Administrator Guide
- it should be on the web somewhere

Good luck, it will take a little time to get familiar with your
environment but its important to put the time in to work out what
means what

Cheers Duncan

--
-----BEGIN EMAIL SIGNATURE-----

The Gospel for all Targeted Individuals (TIs):

[The New York Times] Microwave Weapons Are Prime Suspect in Ills of
U.S. Embassy Workers

Link: https://www.nytimes.com/2018/09/01/science/sonic-attack-cuba-microwave.html

********************************************************************************************

Singaporean Targeted Individual Mr. Turritopsis Dohrnii Teo En Ming's Academic Qualifications as at 14 Feb 2019 and refugee seeking attempts at the United Nations Refugee Agency Bangkok (21 Mar 2017), in Taiwan (5 Aug 2019) and Australia (25 Dec 2019 to 9 Jan 2020):

[1] https://tdtemcerts.wordpress.com/

[2] https://tdtemcerts.blogspot.sg/

[3] https://www.scribd.com/user/270125049/Teo-En-Ming

-----END EMAIL SIGNATURE-----

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

Check out the new Asterisk community forum at: https://community.asterisk.org/

New to Asterisk? Start here:
     https://wiki.asterisk.org/wiki/display/AST/Getting+Started

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to