i know

but there is some existing integration based on AMI event NewExten

https://wiki.asterisk.org/wiki/display/AST/Asterisk+13+ManagerEvent_NewExten ChannelStateDesc = Ringing

and if 180 Ringing is missing, there is no event

as you may have guessed, its hard to convice "Integrator" to "change" the code



Dne 01/12/2020 v 13:22 Floimair Florian napsal(a):
If you have 183 Session progress, there is no need to send 180 Ringing 
(especially not AFTER 183 Session progress), as you already have early media 
instead. Having both is actually a bit misleading IMHO.

So this is actually correct. One should not rely on any of these 1xx 
"Provisional" messages.
They may or may not be sent, without violating SIP standards.

Am 01.12.20, 12:20 schrieb "asterisk-users im Auftrag von marek" 
<[email protected] im Auftrag von [email protected]>:


     hi,

     after upgrade from Asterisk 11 to Asterisk 13.38.0(chan_sip) (i know,
     its old. customer is very conservative...)

     i have problem with missing 180 Ringing

     flow is easy (PBX -> Asterisk -> SIP SBC)

     Asterisk 11
     PBX - Asterisk
     -> INVITE
     <- 100 Trying
     <- 183 Session Progress
     ( <- RTP -> )
     <- 180 Ringing
     <- 200 OK

     Asterisk 13
     -> INVITE
     <- 100 Trying
     <- 183 Session Progress
     ( <- RTP -> )

     __MISSING RINGING___

     <- 200 OK

     temporarily i solved problem with using "R" param

     R: Default: Indicate ringing to the calling party, even if the called party
          isn't actually ringing. Allow interruption of the ringback if early
     media
          is received on the channel.

     it changed to

     Asterisk 13 (Dial(${ARG1},300,R)
     -> INVITE
     <- 100 Trying
     <- 180 Ringing
     <- 183 Session Progress
     ( <- RTP -> )
     <- 200 OK

     any ideas why Ringing is missing? any solutions?

     Marek




--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

Check out the new Asterisk community forum at: https://community.asterisk.org/

New to Asterisk? Start here:
     https://wiki.asterisk.org/wiki/display/AST/Getting+Started

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to