Duncan: You may have it right-I took one phone and set the ring time to 60 seconds. I now get about 4 rings on that one.
I wonder how I can change the timing source. Thomas M. Peters | Sr. Systems Administrator | [email protected]<mailto:[email protected]> Desk: 414.343.1720 | Helpdesk: x3400 or [email protected]<mailto:[email protected]> Milwaukee County Transit System <http://www.ridemcts.com/> 1942 N 17th Street | Milwaukee, WI 53205 Check us out on Facebook<https://www.facebook.com/mcts> & Twitter <https://twitter.com/RideMCTS> From: asterisk-users <[email protected]> On Behalf Of Duncan Sent: Monday, January 14, 2019 2:29 PM To: Asterisk Users Mailing List - Non-Commercial Discussion <[email protected]> Subject: Re: [asterisk-users] Various extensions ring once and go to voicemail On Tue, Jan 15, 2019 at 7:42 AM, Thomas Peters <[email protected]<mailto:[email protected]>> wrote: We have an old Asterisk 1.8.7.0 system desperately need to keep alive for another 6 months or so. We had all kinds of hardware problems, so we virtualized it. Thats a while back, I think it tended to use zaptel or dahdi hardware as a timer, you may need to find a timing source as perhaps the clock in the VM is just going too fast Now, random extensions ring once and go straight to voicemail. I went to one of the affected extensions and changed the ring time from the default (20) to 26. Still one ring. I changed it to 30. Now I get two rings. Other extensions ring once or twice. After some time has gone by since this was first reported, all phones in my random sample ring only twice. As I trace a call to that extension through the log, I notice it setting the ring timer properly (I think) and then I see app_dial.c - SIP/1234-00001111 is ringing Then eventually app_dial.c: -- Nobody picked up in 30000 ms But according to the timestamps, the time from the one event to the other is ten seconds! Here's another example- call starts: [2019-01-14 08:17:33] VERBOSE[13311] pbx.c: -- Executing [3327@cc-long-distance:1] ExecIf("SIP/4704-00001265", "0?Set(__RINGTIMER=0)") in new stack . . . [2019-01-14 08:17:33] VERBOSE[13311] app_dial.c: -- SIP/3327-00001266 is ringing . . . [2019-01-14 08:17:41] VERBOSE[13311] app_dial.c: -- Nobody picked up in 20000 ms So again, the elapsed time is nowhere near 20 seconds. Another: This time the ring time has been set to 30 seconds (and I still get only 2 rings) [2019-01-14 08:41:54] VERBOSE[16008] pbx.c: -- Executing [3327@cc-long-distance:1] ExecIf("SIP/4704-00001304", "1?Set(__RINGTIMER=30)") in new stack . . . [2019-01-14 08:41:54] VERBOSE[16008] pbx.c: -- Executing [s@macro-exten-vm:5] Set("SIP/4704-00001304", "RT=30") in new stack . . . [2019-01-14 08:41:54] VERBOSE[16008] pbx.c: -- Executing [s@macro-dial-one:30] Set("SIP/4704-00001304", "D_OPTIONS=trWw") in new stack . . . [2019-01-14 08:41:54] VERBOSE[16008] app_dial.c: -- SIP/3327-00001305 is ringing . . . [2019-01-14 08:42:05] VERBOSE[16008] app_dial.c: -- Nobody picked up in 30000 ms So, after 9 seconds, it says "Nobody picked up after 30000 ms"??? Is this some weirdness of Oracle VMs? Anybody have any advice for me? Additional information: FreePBX version 2.9.0.7 PBX in a Flash Version 1.2 Daemon Status ******************************************************************** * Asterisk * ONLINE * Dahdi * ONLINE * MySQL * ONLINE * * SSH * ONLINE * Apache * ONLINE * Iptables * OFFLINE * * Fail2ban * OFFLINE * IP Connect* ONLINE * Ip6tables * OFFLINE * * BlueTooth * ONLINE * Hidd * ONLINE * NTPD * ONLINE * * Sendmail * ONLINE * Samba * OFFLINE * Webmin * LOADING * * Ethernet0 * ONLINE * Ethernet1 * ONLINE * Wlan0 * N/A * ******************************************************************** * Running Asterisk Version : Asterisk 1.8.7.0 * Asterisk Source Version : 1.8.7.0 * Dahdi Source Version : 2.5.0.1+2.5.0.1 * Libpri Source Version : 1.4.12 * Addons Source Version : 1.4.7 ******************************************************************** Voipserver on 10.10.141.251 - eth0 Red Hat Enterprise Linux Server release 4.5 (Tikanga) :32 Bit Kernel: 2.6.18-92.1.6.el5 Thomas M. Peters | Sr. Systems Administrator | [email protected]<mailto:[email protected]> Desk: 414.343.1720 | Helpdesk: x3400 or [email protected]<mailto:[email protected]> Milwaukee County Transit System <http://www.ridemcts.com/> 1942 N 17th Street | Milwaukee, WI 53205 Check us out on Facebook<https://www.facebook.com/mcts> & Twitter <https://twitter.com/RideMCTS>
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- Check out the new Asterisk community forum at: https://community.asterisk.org/ New to Asterisk? Start here: https://wiki.asterisk.org/wiki/display/AST/Getting+Started asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
