On Wed, 17 Jan 2018 12:08:40 +0100 Antony Stone <[email protected]> wrote:
> On Wednesday 17 January 2018 at 11:59:21, Paul Neuwirth wrote: > > > Hello group, > > > > I tried a lot to enlarge the frequency (i.e. more announces, low > > wait between). according to config, every 30 seconds the > > announcement should take place. In fact, the first periodic > > announce is done after 2 minutes? > > What is my fault? > > Config snipped for clarity... > > > [defaultq] > > timeout = 10 > > retry = 99 > > wrapuptime=15 > > maxlen = 0 > > announce-frequency = 30 > > min-announce-frequency = 30 > > periodic-announce-frequency = 30 > > announce-holdtime = yes > > announce-position = yes > > announce-to-first-user = yes > > periodic-announce = tt-allbusy,hold-or-dial-0 > > reportholdtime = yes > > I believe that both timeout and retry have to be less than the > announce intervals. > > In your case, retry is set to 99, with the announce intervals set at > 30, therefore you would get announcements at 30, 60, 90, 120, 150... > except that retry=99 stops any announcement before 99, therefore the > first one you get is at 120 (2 minutes). > > So, try setting retry to a value not less than 30 and see if that > fixes things. > > > > Antony. > thank you. working fine now. I misinterpret the retry (thought counts). Unfortunately the documentation (comments) lack dimensions almost at all.. Regards Paul -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- Check out the new Asterisk community forum at: https://community.asterisk.org/ New to Asterisk? Start here: https://wiki.asterisk.org/wiki/display/AST/Getting+Started asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
