Hi, Kseniya!
I have three installations of Asterisk (as FreePBX but I think it is not
important). They work fine.
I have made some settings in Asterisk and Hyper-V:
Asterisk: timing interface - timerfd.
Hyper-V:
1. Virtual Machine => Network Adapter => Hardware Acceleration =>
Virtual Machine Queue - Disable it;
2. Virtual Machine => Processor => Virtual Machine Reserve (percentage)
- set at least 25% (if you have 4 virtual cores for your Asterisk).
You can try to set reserve more or less then 25% - test it and,
please, send email here;
3. Virtual Machine => Integration Services => Time synchronisation -
enable it.
This settings helped me.
Also check your Linux Kernel version - it must be 3.10 or newer. I saw
very bad "timing test" results on kernel 2.6.32.
On 12/18/2017 10:26 AM, Kseniya Blashchuk wrote:
> Hi all!
> Does anybody have experience with asterisk on Hyper-V? My test setup
> with Ubuntu 16 and asterisk 13.1 (ubuntu repo) shows sound distortion.
> I have analyzed the RTP flow with wireshark and I see high skew and
> delta values when the traffic leaves the hypervisor, however
> everything is okay when a capture is taken from a VM itself. I have
> read that there can be timing problems with Hyper-V. I have tried to
> disable time sync with the machine and tried different clocksources. I
> have also tried to change asterisk timing interface to dahdi (dummy) -
> nothing helped so far. Hyper-V version is 12p2.
> Does anybody have a working setup with Hyper-V?
>
>
>
--
С уважением, Дмитрий Ермаков
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
Check out the new Asterisk community forum at: https://community.asterisk.org/
New to Asterisk? Start here:
https://wiki.asterisk.org/wiki/display/AST/Getting+Started
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
