Hi Jonathan Thx for the reply.
Yup, have tried them, may just be our incompetence and inexperience with Asterisk, but cannot get either of them to work right with our particular setup. Due to legacy issues we run very different dialplans at 17 different sites, and some in-house custom software for Asterisk, and from testing 13 and 14 it appears each and every one of the sites will need custom rebuilding and redesigning to work right with the newer versions. We also use different hardware (DAHDI wise) at each site, different, -very- old PRI cards manufactured by different companies, etc. Plus, been monitoring the group closely for about two years now, the problems and bugs apparent with 13 and 14 (some of which were solved, granted) are spine chilling - if we run into some of the issues I've seen around, our business will collapse. PJSIP especially appears to be an absolutely horrendous nightmare - extremely complex and difficult to configure for the type of situations we have where 1.8.32.3 has been doing fine for years, over several tens of millions of calls. But just my two cents, I could be completely wrong - if I can put the below issue to bed definitively, the people I report to will probably stay on standard 1.8.32.3 till it can no longer be compiled in a whenever-contemporary Linux / libc / gcc environment... >It might be worth pointing out that 1.8x was released 6 years ago, went into security fix only over 2 years ago, and reached "end of life/no further fixes" over a year ago. >11.x went into "security fix only" last month - 13 and 14 are the current versions - can you try with them? On 23 November 2016 at 12:52, Stefan Viljoen <[email protected]> wrote: > Hi all > > I get this warning in the Asterisk CLI about once every ten minutes or so: > > [Nov 23 14:47:36] WARNING[2544]: res_odbc.c:647 > ast_odbc_prepare_and_execute: SQL Execute returned an error -1: HY000: > [MySQL][ODBC 5.1 Driver][mysqld-5.1.73]Deadlock found when trying to > get lock; try restarting transaction (105) [Nov 23 14:47:36] > WARNING[2544]: res_odbc.c:659 > ast_odbc_prepare_and_execute: SQL Execute error -1! Verifying > connection to cdr [asterisk-cdr]... > [Nov 23 14:47:36] WARNING[2544]: res_odbc.c:763 ast_odbc_sanity_check: > Connection is down attempting to reconnect... > [Nov 23 14:47:36] NOTICE[2544]: res_odbc.c:1541 odbc_obj_connect: > Connecting cdr [Nov 23 14:47:36] NOTICE[2544]: res_odbc.c:1573 > odbc_obj_connect: res_odbc: > Connected to cdr [asterisk-cdr] > > Does this imply that I'm missing the ODBC CELs and / or CDRs that were > trying to write to MySQL over ODBC when the above occurred? > > Or will the ODBC module in Asterisk (or ODBC itself?) recover > gracefully and re-emit the CEL or CDR insert that hit the lock and > were therefore NOT written to MySQL? > > Thanks, > > Stefan > > > > > > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > Check out the new Asterisk community forum at: > https://community.asterisk.org/ > > New to Asterisk? Start here: > https://wiki.asterisk.org/wiki/display/AST/Getting+Started > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users ------------------------------ Message: 3 Date: Wed, 23 Nov 2016 20:58:52 +0200 From: christopher kamutumwa <[email protected]> To: asterisk-users <[email protected]> Subject: [asterisk-users] Asterisk Installation Message-ID: <CADdH5aPyh4ZS_St-iONUtPd7_w4GQsfKWP=oLZM=kqkat4o...@mail.gmail.com> Content-Type: text/plain; charset="utf-8" Goodday users Am quite new to asterisk and trying to configure it with an fxo and fxs digium card. also i need a gui interface implemented. I have a centos 6.8 server any tutorial i could use for install and configuration? would appreciate. Thanks Chris -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20161123/e58d9 8d0/attachment-0001.html> ------------------------------ Message: 4 Date: Wed, 23 Nov 2016 14:02:18 -0500 From: D'Arcy Cain <[email protected]> To: [email protected] Subject: Re: [asterisk-users] Touch tone stutter Message-ID: <[email protected]> Content-Type: text/plain; charset=windows-1252; format=flowed On 2016-11-22 07:49 PM, Pete Mundy wrote: > > One direction that may be worth exploring further is his ATA's config (or perhaps swapping it for a different model). Eg adjusting echo cancellation or line impedance settings. I have to be careful here as I auto-provison these devices and changes would propogate to every user. Echo cancellation is off. Do you think it should be on? > Is the ATA he is using the same as the ATA you use? No but it is the same as other users who do not have the problem. I use a SIP phone and a Cisco ATA. > Failure to correctly recognise and decode DTMF is just one of many > reasons why I never use them (ATAs). Like faxing over VoIP, they're > just too much trouble :( I understand but some use cases just need it. > Genuine IP phones are pretty good value these days. Could you drop one of those on-site as a temporary measure to prove that it's phone and/or ATA related? He does want to have an extension so that won't work. > Ps, you might also want to consider joining VoiceOps (if you're not > already subscribed) and posting there. > https://puck.nether.net/mailman/listinfo/voiceops I have subscribed. Thanks. -- D'Arcy J.M. Cain System Administrator, Vex.Net http://www.Vex.Net/ IM:[email protected] VoIP: sip:[email protected] ------------------------------ Message: 5 Date: Thu, 24 Nov 2016 00:40:18 +0530 From: Arun Kumar <[email protected]> To: Asterisk Users Mailing List - Non-Commercial Discussion <[email protected]> Subject: Re: [asterisk-users] Asterisk Installation Message-ID: <canyuqxdqwoqtv6w_ihb-qt-gls4_fpbynejh_r7rn8b_ppo...@mail.gmail.com> Content-Type: text/plain; charset="utf-8" Hey Chris, Starts from here, https://wiki.asterisk.org/wiki/display/AST/Getting+Started or try Asterisk Complete guide in pdf format. If you are looking for something graphical, go for elastix or freepbx. Thanks ~Arun On Thu, Nov 24, 2016 at 12:28 AM, christopher kamutumwa < [email protected]> wrote: > Goodday users > > Am quite new to asterisk and trying to configure it with an fxo and fxs > digium card. also i need a gui interface implemented. I have a centos 6.8 > server any tutorial i could use for install and configuration? would > appreciate. > > Thanks > > Chris > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > Check out the new Asterisk community forum at: https://community.asterisk. > org/ > > New to Asterisk? Start here: > https://wiki.asterisk.org/wiki/display/AST/Getting+Started > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20161124/9748f e2e/attachment-0001.html> ------------------------------ Message: 6 Date: Wed, 23 Nov 2016 17:41:19 -0500 From: Matt Riddell <[email protected]> To: Asterisk Users Mailing List - Non-Commercial Discussion <[email protected]> Subject: [asterisk-users] Subscribe to events via ARI from node.js without sending to Stasis Message-ID: <[email protected]> Content-Type: text/plain; charset="us-ascii" Hi, I'm writing a node.js backend to pass events via a websocket to a CRM. Basically what I want to do is notice when things happen (i.e. new channel, new bridge etc) without sending the channels to the Stasis app. The channels I'm interested in are agents who are in a queue only because they are in a realtime MySQL database for the queue_member_table. There doesn't appear to be a way to monitor general Asterisk events like you can in the Asterisk manager without polling for channel statuses or sending the channels to the Stasis app and recreating the logic of the Queue application. Is this a correct assumption? -- Cheers, Matt Riddell _______________________________________________ http://www.venturevoip.com/news.php (Daily Asterisk News) http://www.venturevoip.com/pabx_on_disk.php (PABX on a Disk) http://www.venturevoip.com/exchange.php (Full ITSP Solution) http://www.venturevoip.com/cc.php (Call Centre Solutions) -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20161123/4bb85 352/attachment-0001.html> ------------------------------ Message: 7 Date: Thu, 24 Nov 2016 10:49:41 +0100 From: Juergen Sauer <[email protected]> To: Asterisk Users Mailing List - Non-Commercial Discussion <[email protected]> Subject: [asterisk-users] unsbubscribe Message-ID: <[email protected]> Content-Type: text/plain; charset=utf-8 unsbubscribe mit freundlichen Gr??en J?rgen Sauer -- J?rgen Sauer - automatiX GmbH, +49-4209-4699, [email protected] Gesch?ftsf?hrer: J?rgen Sauer, Gerichtstand: Amtsgericht Walsrode ? HRB 120986 Ust-Id: DE191468481 ? St.Nr.: 36/211/08000 GPG Public Key zur Signaturpr?fung: http://www.automatix.de/juergen_sauer_publickey.gpg ------------------------------ Message: 8 Date: Thu, 24 Nov 2016 17:20:54 +0000 From: A J Stiles <[email protected]> To: [email protected] Subject: [asterisk-users] Triggering an AGI script when a queued call is answered Message-ID: <[email protected]> Content-Type: Text/Plain; charset="us-ascii" Many years ago, I used to have an AGI script that fired on an incoming call, did some database lookups and ended up raising a notification on the screen of the person whose phone was ringing, with the details looked up from the incoming caller ID. All that fell by the wayside when Debian Squeeze introduced KDE4 and the notification system I had created stopped working. And some time after that, we introduced queues instead of everyone having their own direct inbound number ..... Now, some tie-wearer is dribbling on me to bring back the old system. I am confident that I could write something that will work with the new cross- desktop notification model (and in any case, that is a matter for Elsewhere On The Internet). However, I am going to need to hook it into Asterisk somehow. What I think I need is for an event to fire when someone answers a queued call; then I can run an AGI script, or execute a script using the System() command. Within my script, I need the variable ${CALLERID(num)} to look up the caller's details from their number, and the answering extension to decide where to send the notification. Is there a way of specifying in the dialplan or queue configuration that I want to execute a script when an agent answers? So far, all I can think of is joining local channels into the queue instead of the actual phones, so I get to run a bit of dialplan where I can kick off the AGI script and then Dial() the actual extension; but that could get terribly unwieldy if not done extremely carefully. (Of course, the manager in question also insists for me to implement all this without a moment's downtime. Kids, this is what happens when your brain is deprived of oxygen .....) -- AJS Note: Originating address only accepts e-mail from list! If replying off- list, change address to asterisk1list at earthshod dot co dot uk . ------------------------------ _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- Check out the new Asterisk community forum at: https://community.asterisk.org/ New to Asterisk? Start here: https://wiki.asterisk.org/wiki/display/AST/Getting+Started asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users End of asterisk-users Digest, Vol 148, Issue 25 *********************************************** -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- Check out the new Asterisk community forum at: https://community.asterisk.org/ New to Asterisk? Start here: https://wiki.asterisk.org/wiki/display/AST/Getting+Started asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
