Did you try to upgrade the firmware?, some issues we saw with rtp stream, went away after a firmware upgrade.
http://www.sipura.com -SamW -----Original Message----- From: Mark Messmore, Technical Support, University Telcom Inc. [mailto:[EMAIL PROTECTED] Sent: Tuesday, March 02, 2004 1:59 PM To: [EMAIL PROTECTED] Subject: [Asterisk-Users] Sipura 2000 not ringing. I was just wondering if anyone has had this situation...or one similar to it. I've got a Sipura SPA 2000. After hooking it up and configuring it with my * box, it has worked well. From both lines we are able to dial out at any point in time. However after a few minutes (5-10 usually) the Sipura will stop sending a ringer signal to the phones. We can still dial, * shows that it is ringing those SIP clients, and both lines are still shown as being "registered". Everything will work fine for the first 5-10 minutes after being "rebooted"...however after that there is silence. Even if I dial the line from my cell phone and pick up the telephone that I am dialing...there is dial-tone...therefore it seems that the Sipura is just not passing those incoming calls after a short time period. If you have any idea why this is happening I'd sure appreciate hearing your thoughts. Thanks Mark _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
