Hi Mark, its sets the context in zapata.conf.. put a context=<contextname> somewhere above where you define the channels
then in your extensions.conf, create the context if you've not already, start with a exten=> _.,1,Dial(blah...) then modify from that to suit your setup Steve On Mon, 1 Mar 2004, Mark Messmore, Technical Support, University Telcom...: > > Hey...I'm sure that this is something very simple that I'm missing (I've > had * just about 2 weeks or so now and just finally got my x100p card > in). Here's my simple setup. > > VoIP Network--*--PSTN via X100P > > I can make outbound calls from my VoIP network just fine. However, when > trying to dial in I receive the following messages in my console. > > > -- Starting simple switch on 'Zap/1-1' > Mar 1 15:58:30 WARNING[1234379840]: pbx.c:1778 ast_pbx_run: Channel > 'Zap/1-1' sent into invalid extension 's' in context 'default', but no > invalid handler > -- Hungup 'Zap/1-1' > > I've looked all through my extensions.conf and my sip.conf (I figured > that was not the place, but thought that I would look anyway)...however > I can not find where this is receiving the context as "default" and the > extension as "s". I realize that these are the defaults with the > configs from my install...In what other configuration files should I be > looking so I can set this to where it really should go? > > Thanks in advance! > > Mark > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
