Hello,
I setup a door open system with a basic DTMF card. The card is connected
to an Sipura/Linksys 3102 FXS port and is powered by this port.
My problem is that when I send a call with Dial() command, channel has
to be answered before receiving DTMFs, what my card does not. Is there a
way to autoanswer those type of calls or to send DTMF on an non answered
channel or another solution/idea to rich the goal ?
Only solution I found is to connect an analog phone in parallel to my
card and to set it in autoanswer mode: at this moment the card get the
DTMF sended via SendDTMF() command.
Thanks for any hint. Asterisk is 11.15.0 from Elastix 2.5
Regards
--
Daniel
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
