The strange thing is its only sometimes my dial string is as follows
exten => s,1, Dial (SIP/200,, tT)
For that particular route but obviously s,3 as have Ringing () first etc.
After she pushes ## 6 times it will go thru sometimes.
Sent from Samsung Mobile
<div>-------- Original message --------</div><div>From: Kevin Larsen
<[email protected]> </div><div>Date:16/02/2015 17:11
(GMT+02:00) </div><div>To: Andrew Colin <[email protected]>,Asterisk
Users Mailing List - Non-Commercial Discussion
<[email protected]> </div><div>Subject: Re: [asterisk-users]
BlindXfer Sensitivity </div><div>
</div>> Hi Guys
>
> We have a client running on a polycom vvx400 IP phone on our
> asterisk 1.8.18 system
>
> The issue we have is the switchboard lady uses ## to transfer calls
> but sometimes it just does not work and just plays the DTMF tone to
> the calling party.
>
> Is there any way to adjust the sensitivity of the blindxfer feature?
>
> The polycom Transfer button is useless as there is a big delay
> until it apprears
>
> I would greatly appreciate any advice
It seems weird that this would be some kind of sensitivity to the DTMF tones.
The first thing I would look for is on a call that she cannot blind transfer,
check how the Dial command was used to reach her. Does it have the proper use
of the tT options (depending on whether she called them or they called her)? I
would almost bet there is a call path that occurs which doesn't have the proper
options set to allow the transfer.
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
