in /etc/zaptel.conf: span=1,0,0,esf,b8zs # the chan bank fxsks=1-8 # FXO cards fxoks=9-24 # FXS cards span=2,1,0,esf,b8zs # the PRI bchan=40-47 # channels 16-23 dchan=48 # channel 24
in /etc/asterisk/zapata.conf ... chan bank channels context=<yourcontext> signalling=pri_cpe ; on the customer premise side of the T1 group=2 channel=> 40-47 ; channels 16-23 on the T1
in /etc/asterisk/extensions.conf exten => 1160,1,Wait(1) ; main number exten => 1160,2,Goto(<1160context>,s,1) ; go to old FXO context exten => 1265,1,Wait(1) ; another main number exten => 1265,2,Goto(<1265context>,s,1) exten => 8080,1,Wait(1) ; the first DID number exten => 8080,2,Dial(Zap/9,15,t) ; dial the extension set exten => 8080,3,Voicemail... etc.
Note that I get only the last four digits from my CLEC--yours may be different. You can enter "pri debug span <n>" at the console to see the incoming messages.
Cheers
Tri Tu wrote:
Hello everyone,
I'm trying to setup the T1 line with T100P card but could not get it accepts inbound calls. I only got busy signal. Anyone know what would be the dialplan (extension.conf) to accept T1 line calls.
Thanks.
-Tri.
-- Michael Welter Introspect Consulting, Inc. Denver, Colorado +1 303 674 2575 [EMAIL PROTECTED] www.introspect.com
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
