Here are the commands
asteriskpbx@pbxmain:/etc/dahdi$ dahdi_cfg -vvv
DAHDI Tools Version - 2.7.0.2
DAHDI Version: 2.7.0.1
Echo Canceller(s): MG2
Configuration
======================
Channel map:
Channel 01: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 01)
Channel 02: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 02)
Channel 03: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 03)
Channel 04: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 04)
Channel 05: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 05)
Channel 06: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 06)
Channel 07: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 07)
Channel 08: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 08)
8 channels to configure.
Setting echocan for channel 1 to mg2
Setting echocan for channel 2 to mg2
Setting echocan for channel 3 to mg2
Setting echocan for channel 4 to mg2
Setting echocan for channel 5 to mg2
Setting echocan for channel 6 to mg2
Setting echocan for channel 7 to mg2
Setting echocan for channel 8 to mg2
asteriskpbx@pbxmain:/etc/dahdi$
pbxmain*CLI> module show like chan_dahdi.so
Module Description Use
Count
chan_dahdi.so DAHDI Telephony Driver w/PRI 0
1 modules loaded
>________________________________
> From: Eric Wieling <[email protected]>
>To: Joseph Towery <[email protected]>; Asterisk Users Mailing List -
>Non-Commercial Discussion <[email protected]>
>Sent: Thursday, December 5, 2013 9:09 PM
>Subject: RE: [asterisk-users] "dahdi show channels" no such command
>
>
>Run "dahdi_cfg -vvv" to verify DAHDI kernel modules are loaded and configured
>correctly.
>
>Verify chan_dahdi.so is built and located in your Asterisk modules directory,
>usually /usr/lib/asterisk/modules/ If there is no chan_dahdi.so chances are
>you built Asterisk before installing DAHDI. Rerun ./configure or run "make
>distclean" and then rerun ./configure to rebuild Asterisk.
>
>Use the command "module show like dahdi" in the Asterisk CLI to verify
>chan_dahdi.so is loaded. If it isn't loaded then chances are you have a
>chan_dahdi.conf issue.
>
>
>-----Original Message-----
>From: [email protected]
>[mailto:[email protected]] On Behalf Of Joseph Towery
>Sent: Thursday, December 05, 2013 8:41 PM
>To: [email protected]
>Subject: [asterisk-users] "dahdi show channels" no such command
>
>I have followed the instructions in Asterisk The Definitive Guide 4th edition.
> Once I load DAHDI I run the dahdi show channels command and get no such
>command. I have setup all the conf files. I compiled DADHI prior to Asterisk.
>
>Any ideas?
>
>
>
>
>
>
>
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
