Hi,
I've set an Asterisk 11 box with a TDM400 board and Dahdi 2.7.0.1.
I've connected an FXS port to an FXO one and issued a couple of channel
originate command to measure the duration Asterisk/Dahdi needs to detect a
dahdi call is coming in.
Basically, using EPOCH variable, I'm reading a 2 or 3s duration with the
followinf AEL2 dialplan:
context remote {
s => {
if ("x${DB(Start/FXS1)}" != "x") {
Duration=$[${EPOCH} - ${DB(Start/FXS1)}];
Verbose(0,Duration is ${Duration});
}
Answer();
Wait(5);
HangUp();
};
};
context mylocal {
1 => {
DB(Start/FXS1)="${EPOCH}";
Dial(DAHDI/1);
HangUp();
};
};
How should I rate this 2s or 3s duration ?
Can I shorten this value ?
On the opposite, which settings would significantly increase this duration ?
With the same king of dialplan, I observed hangup needed 4 or 5s to
propagate from one port to the other. How should I rate this duration ?
Can I also shorten this value ?
Regards
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
