RE: [Asterisk-Users] PRI error or what?

[Tomica Crnek]

As you can see, I have 2 E1 trunks/spans. The first one is connected to telco, and I already have them as a sync source defined (span = 1,1,0,ccs,hdb3,crc4). The second trunk is connected to my internal PBX on which I didn't configure sync (the timing parameter is "0") From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Daniel Bichara Sent: Tuesday, February 17, 2004 7:16 PM To: [EMAIL PROTECTED] Subject: Re: [Asterisk-Users] PRI error or what? C. Maj wrote: On Tue, 17 Feb 2004, Tomica Crnek waxed: I have TE410P with two E1 links connected. It is working ok, but suddenly, from time to time I got this and it goes on and on for a few minutes during which period I can't establish new calls == D-Channel on span 1 up == D-Channel on span 1 up == D-Channel on span 2 up == D-Channel on span 1 up == D-Channel on span 2 up == D-Channel on span 1 up == D-Channel on span 2 up == D-Channel on span 1 up == D-Channel on span 2 up == D-Channel on span 1 up == D-Channel on span 1 up == D-Channel on span 1 up == D-Channel on span 1 up == D-Channel on span 2 up == D-Channel on span 1 up == D-Channel on span 2 up == D-Channel on span 1 up == D-Channel on span 2 up == D-Channel on span 1 up == D-Channel on span 2 up This could be a problem with your telco. I had the same thing for a couple of months before they finally identified it as their "bad cable pair" in outside wiring. Run a trace on the PRI from *, and find someone at the telco to do the same on their end. I solved this problem when I changed my sync source: span = 1,1,0,ccs,hdb3 Daniel Good luck, --Chris _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users