Hello. I've got a Cisco SPA303 that I'm trying to provision via http. I noticed that this device looks very similar to a PAP2T, so I used that as a template for my provisioning file.
However, the result is less than stellar. Line 1 registers and works. However, lines 2 and 3 also register as line 1, effectively giving me a 1-line phone with 3 buttons. Also, the line name is the same on all 3 phone lies. I've looked on Cisco's website and Googled around, but I can not find a true example of a provisioning file for this device. Anything I could find would be enough for me to make a template. Does anyone know of an example provisioning file for this device? I've included, below, a (sanitized) copy of the file I'm using. The user_id is simply the device's MAC address, followed by a dash, then the line number. Any help you could give me would be most appreciated. <flat-profile> <HostName>hostnamexxx</HostName> <User_Password></User_Password> <Admin_Passwd></Admin_Passwd> <Auth_Resync-Reboot_1_>No</Auth_Resync-Reboot_1_> <Auth_Resync-Reboot_2_>No</Auth_Resync-Reboot_2_> <Display_Name_1_ ua="na">3CCE73D241A9-1</Display_Name_1_> <User_ID_1_ ua="na">3CCE73D241A9-1</User_ID_1_> <Auth_ID_1_ ua="na">3CCE73D241A9-1</Auth_ID_1_> <Password_1_ ua="na">DICLFUXOT1SWNQEW</Password_1_> <Use_Auth_ID_1_ ua="na">Yes</Use_Auth_ID_1_> <Use_DNS_SRV_1_>yes</Use_DNS_SRV_1_> <DNS_SRV_Auto_Prefix_1_ ua="na">Yes</DNS_SRV_Auto_Prefix_1_> <Display_Name_2_ ua="na">3CCE73D241A9-2</Display_Name_2_> <User_ID_2_ ua="na">3CCE73D241A9-2</User_ID_2_> <Auth_ID_2_ ua="na">3CCE73D241A9-2</Auth_ID_2_> <Password_2_ ua="na">KVJJZPAMSI[WM1ISR</Password_2_> <Use_Auth_ID_2_ ua="na">Yes</Use_Auth_ID_2_> <Use_DNS_SRV_2_>yes</Use_DNS_SRV_2_> <DNS_SRV_Auto_Prefix_2_ ua="na">Yes</DNS_SRV_Auto_Prefix_2_> <Proxy_1_> example.com </Proxy_1_> <Proxy_2_>example.com </Proxy_2_> <Outbound_Proxy_1_> example.com </Outbound_Proxy_1_> <Outbound_Proxy_2_> example.com </Outbound_Proxy_2_> <Profile_Rule> http://example.com/index.pl?mac=$MA </Profile_Rule> <VMWI_Ring_Splash_Len>0</VMWI_Ring_Splash_Len> <VMWI_Ring_Splash_Len_1_>0</VMWI_Ring_Splash_Len_1_> <VMWI_Ring_Splash_Len_2_>0</VMWI_Ring_Splash_Len_2_> </flat-profile> -- Mike Diehl. -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
