Thanks ricardo for your reply :) I will try to comment that line. One thing for sure: the cid is working on a analog phone, I just test it this morning.
Btw, somebody told that this may be caused by irq conflict. Is it safe to disable the audio card on bios ? Thanks again :) On 4/23/12, Mc GRATH Ricardo <[email protected]> wrote: > Hi Anam > > It seem should be work, but I just have a question about chan_dahdi.conf > regardless to parameter > rxwink=300 ; Atlas seems to use long (250ms) winks > By the way gain parameters shouldn´t have any effect to CID signal > processing, how about to comment, and test again, if still without working > try to connect parallel phone with Asterisk it will check if could be a > hardware problem or configuration parameter setting > > Good luck > Mc GRATH Ricardo > E-Mail [email protected] > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > -- Sent from my mobile device -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
