Restart the machine just now, and the caller id problem still there :( Is there any other ways I can try again?
Thanks a lot :) On 4/23/12, SamyGo <[email protected]> wrote: > do a complete reload(dahdi/asterisk/amportal) and then check. > > On Mon, Apr 23, 2012 at 12:18 PM, Satria Anamarta > <[email protected]>wrote: > >> Thanks Sammy for looking at my post :) >> >> Removing those 2 lines for all the channel still doesn't solve the problem >> :( >> >> Any other ways I should try? >> >> BR, >> Anam >> >> On 4/23/12, SamyGo <[email protected]> wrote: >> > I see extra/additional fields in the pasted configuration >> > dahdi-channels.conf, try removing these. Then do a "module reload >> > chan_dahdi" >> > >> > >> >> callerid= >> >> group= >> > >> > >> > Regards, >> > Sammy >> > >> > On Sun, Apr 22, 2012 at 12:49 PM, Satria Anamarta >> > <[email protected]>wrote: >> > >> >> This is a very strange problem (at least for me). I just realized that >> >> started from April 20th 2012 every inbound call is from "unknown". >> >> Prior that, asterisk succesfully displayed the caller caller's ID for >> SOME >> >> of the calls (30-50% success rate). I am using PBX | monitoring menu to >> >> see >> >> this report. >> >> >> >> As far as I remember, I dont modify any settings that related to caller >> >> ID, but few days ago (I dont remember the exact date), I modify the >> rxgain >> >> and txgain value in chan_dahdi.conf. >> >> The inbound caller ID doesn't display on the log and on the phone. >> >> >> >> I'm running asterisk 1.8.7.0 >> >> FreePBX 2.8.1 >> >> FXO card using Digium AEX800B >> >> >> >> The caller ID is display well on the phone If I connect the phone >> directly >> >> without connecting to asterisk (just for testing purpose) >> >> >> >> This is my chan_dahdi.conf >> >> >> >> [trunkgroups] >> >> >> >> [channels] >> >> context=from-pstn >> >> signalling=fxs_ks >> >> rxwink=300 ; Atlas seems to use long (250ms) winks >> >> usecallerid=yes >> >> hidecallerid=no >> >> callwaiting=yes >> >> usecallingpres=yes >> >> callwaitingcallerid=yes >> >> threewaycalling=yes >> >> transfer=yes >> >> canpark=yes >> >> cancallforward=yes >> >> callreturn=yes >> >> echocancel=yes >> >> echocancelwhenbridged=no >> >> faxdetect=incoming >> >> echotraining=800 >> >> rxgain=8.0 >> >> txgain=8.0 >> >> callgroup=1 >> >> pickupgroup=1 >> >> >> >> ;Uncomment these lines if you have problems with the disconection of >> your >> >> analog lines >> >> ;busydetect=yes >> >> ;busycount=3 >> >> >> >> >> >> immediate=no >> >> >> >> #include dahdi-channels.conf >> >> #include chan_dahdi_additional.conf >> >> chan_dahdi.conf (END) >> >> >> >> This is my dahdi-channels.conf >> >> ; Autogenerated by /usr/sbin/dahdi_genconf on Fri Mar 30 22:32:16 2012 >> >> ; If you edit this file and execute /usr/sbin/dahdi_genconf again, >> >> ; your manual changes will be LOST. >> >> ; Dahdi Channels Configurations (chan_dahdi.conf) >> >> ; >> >> ; This is not intended to be a complete chan_dahdi.conf. Rather, it is >> >> intended >> >> ; to be #include-d by /etc/chan_dahdi.conf that will include the global >> >> settings >> >> ; >> >> >> >> ; Span 1: WCTDM/0 "Wildcard AEX800 Board 1" (MASTER) >> >> ;;; line="1 WCTDM/0/0 FXSKS" >> >> signalling=fxs_ks >> >> callerid=asreceived >> >> group=0 >> >> context=from-pstn >> >> channel => 1 >> >> callerid= >> >> group= >> >> context=default >> >> >> >> ;;; line="2 WCTDM/0/1 FXSKS" >> >> signalling=fxs_ks >> >> callerid=asreceived >> >> group=0 >> >> context=from-pstn >> >> channel => 2 >> >> callerid= >> >> group= >> >> context=default >> >> >> >> ;;; line="3 WCTDM/0/2 FXSKS" >> >> signalling=fxs_ks >> >> callerid=asreceived >> >> group=0 >> >> context=from-pstn >> >> channel => 3 >> >> callerid= >> >> group= >> >> context=default >> >> >> >> ;;; line="4 WCTDM/0/3 FXSKS" >> >> signalling=fxs_ks >> >> callerid=asreceived >> >> group=0 >> >> context=from-pstn >> >> channel => 4 >> >> callerid= >> >> group= >> >> context=default >> >> >> >> ;;; line="5 WCTDM/0/4 FXSKS" >> >> signalling=fxs_ks >> >> callerid=asreceived >> >> group=0 >> >> context=from-pstn >> >> channel => 5 >> >> callerid= >> >> group= >> >> context=default >> >> >> >> ;;; line="6 WCTDM/0/5 FXSKS" >> >> signalling=fxs_ks >> >> callerid=asreceived >> >> group=0 >> >> context=from-pstn >> >> channel => 6 >> >> callerid= >> >> group= >> >> context=default >> >> >> >> Any help would be very appeciated. >> >> >> >> Thanks and best regards, >> >> Anam. >> >> >> >> -- >> >> _____________________________________________________________________ >> >> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >> >> New to Asterisk? Join us for a live introductory webinar every Thurs: >> >> http://www.asterisk.org/hello >> >> >> >> asterisk-users mailing list >> >> To UNSUBSCRIBE or update options visit: >> >> http://lists.digium.com/mailman/listinfo/asterisk-users >> >> >> > >> >> -- >> Sent from my mobile device >> >> -- >> _____________________________________________________________________ >> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >> New to Asterisk? Join us for a live introductory webinar every Thurs: >> http://www.asterisk.org/hello >> >> asterisk-users mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users >> > -- Sent from my mobile device -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
