I am still getting the same error On 3/21/12, white hat <[email protected]> wrote: > Just a guess here, but it looks like you are dialing a 10 digit phone > number but the dial pattern in your outbound route does not handle that. > > Try using a different dial pattern in your outbound route such as: > > 1NXXNXXXXXX or 9|1NXXNXXXXXX > > I believe that asterisk is telling you that all circuits are busy because > none of the outbound routes can be matched against the pattern you are > dialing. > > On Wed, Mar 21, 2012 at 12:48 AM, SamyGo <[email protected]> wrote: > >> This is not in human readable format, but using my special powers I was >> able to locate the lines >> >> -- Called fxosip/0799490994 >> -- SIP/fxosip-00000015 is circuit-busy >> == Everyone is busy/congested at this time (1:0/1/0) >> >> Please enable sip debug for this carrier and then try to send the sip >> traces in human readable format. From those traces it'd be more clear what >> is the issue from the carrier end rejecting the calls...Maybe your credit >> expired !! >> >> Regards, >> Sammy. >> >> On Wed, Mar 21, 2012 at 9:36 AM, James Mutuku <[email protected]>wrote: >> >>> I have setup a trunk on freepbx and the outbound route. Everytime I dial >>> via the trunk, I get "all circuits are busy now". Incoming calls are >>> working fine on the trunk. This is my dial 9|XXXXXXX. and these are my >>> peer >>> details allow=ulaw&alaw canredirect=no disallow=all dtmfmode=rfc2833 >>> host=192.168.9.251 insecure=very type=peer Below are the logs. my trunk >>> name is called fxosip Using SIP RTP TOS bits 184 [0K == Using SIP RTP >>> CoS >>> mark 5 [0K -- Called fxosip/0799490994 [0K -- SIP/fxosip-00000015 >>> is >>> circuit-busy [0K == Everyone is busy/congested at this time (1:0/1/0) >>> [0K >>> -- Executing [s@macro-dialout-trunk:20][1;36mNoOp [0m(" >>> [1;35mSIP/3000-00000014 [0m", [1;35mDial failed for some reason with >>> DIALSTATUS = CONGESTION and HANGUPCAUSE = 1 [0m") in new stack [0K -- >>> Executing [s@macro-dialout-trunk:21] [1;36mGoto [0m(" >>> [1;35mSIP/3000-00000014 [0m", [1;35ms-CONGESTION,1 [0m") in new stack [0K >>> -- Goto (macro-dialout-trunk,s-CONGESTION,1) [0K -- Executing >>> [s-CONGESTION@macro-dialout-trunk:1] [1;36mSet [0m(" >>> [1;35mSIP/3000-00000014 [0m", " [1;35mRC=1 [0m") in new stack [0K -- >>> Executing [s-CONGESTION@macro-dialout-trunk:2] [1;36mGoto [0m(" >>> [1;35mSIP/3000-00000014 [0m", " [1;35m1,1 [0m") in new stack [0K -- >>> Goto >>> (macro-dialout-trunk,1,1) [0K -- Executing [1@macro-dialout-trunk:1] >>> [1;36mGoto [0m(" [1;35mSIP/3000-00000014 [0m", [1;35mcontinue,1 [0m") in >>> new stack [0K -- Goto (macro-dialout-trunk,continue,1) [0K -- >>> Executing [continue@macro-dialout-trunk:1] [1;36mGotoIf [0m(" >>> [1;35mSIP/3000-00000014 [0m", [1;35m1?noreport [0m") in new stack [0K >>> -- >>> Goto (macro-dialout-trunk,continue,3) [0K -- Executing >>> [continue@macro-dialout-trunk:3] [1;36mNoOp [0m(" >>> [1;35mSIP/3000-00000014 [0m", " [1;35mTRUNK Dial failed due to CONGESTION >>> HANGUPCAUSE: 1 - failing through to other trunks [0m") in new stack [0K >>> -- Executing [continue@macro-dialout-trunk:4] [1;36mSet [0m(" >>> [1;35mSIP/3000-00000014 [0m", [1;35mCALLERID(number)=3000 [0m") in new >>> stack [0K -- Executing [90722490994@from-internal:5] [1;36mMacro >>> [0m(" [1;35mSIP/3000-00000014 [0m", [1;35moutisbusy, [0m") in new stack >>> [0K >>> -- Executing [s@macro-outisbusy:1] [1;36mProgress [0m(" >>> [1;35mSIP/3000-00000014 [0m", " [1;35m [0m") in new stack [0K -- >>> Executing [s@macro-outisbusy:2] [1;36mGotoIf [0m(" >>> [1;35mSIP/3000-00000014 [0m", [1;35m0?emergency,1 [0m") in new stack [0K >>> -- Executing [s@macro-outisbusy:3] [1;36mGotoIf [0m(" >>> [1;35mSIP/3000-00000014 [0m", [1;35m0?intracompany,1 [0m") in new stack >>> [0K >>> -- Executing [s@macro-outisbusy:4] [1;36mPlayback [0m(" >>> [1;35mSIP/3000-00000014 [0m", >>> [1;35mall-circuits-busy-now&pls-try-call-later, noanswer [0m") in new >>> stack >>> [0K -- <SIP/3000-00000014> Playing 'all-circuits-busy-now.gsm' >>> (language >>> 'en') [0K == Spawn extension (macro-outisbusy, s, 4) exited non-zero on >>> 'SIP/3000-00000014' in macro 'outisbusy' == Spawn extension >>> (from-internal, 90722490994, 5) exited non-zero on 'SIP/3000-00000014' >>> Best >>> Regards, James Mutuku Ndeti Agile Systems Limited +254722490994 >>> www.agile.co.ke Has your organization implemented a customer >>> relationship management (CRM)system? visit >>> http://www.agile.co.ke/crm.phpand find out how our CRM can help you >>> achieve better customer satisfaction >>> and sales >>> _____________________________________________________________________ -- >>> Bandwidth and Colocation Provided by http://www.api-digital.com -- New >>> to Asterisk? Join us for a live introductory webinar every Thurs: >>> http://www.asterisk.org/hello asterisk-users mailing list To >>> UNSUBSCRIBE or update options visit: >>> http://lists.digium.com/mailman/listinfo/asterisk-users >> >> >> >> -- >> _____________________________________________________________________ >> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >> New to Asterisk? Join us for a live introductory webinar every Thurs: >> http://www.asterisk.org/hello >> >> asterisk-users mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users >> >
-- Best Regards, James Mutuku Ndeti Agile Systems Limited +254722490994 www.agile.co.ke www.zetu.co.ke Has your organization implemented a customer relationship management (CRM)system? visit http://www.agile.co.ke/crm.php and find out how our CRM can help you achieve better customer satisfaction and sales -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
