Same here... Usually after several of these show up in my system log:
Power alarm on module 1, resetting! Need to unload/reload module wcfxs in order to get the dial tone back. Happens several times a week, sometimes more frequently. John ------------------------------------------------------------------------- NetRom Internet Services 973-208-1339 voice [EMAIL PROTECTED] 973-208-0942 fax http://www.netrom.com ------------------------------------------------------------------------- On Thu, 12 Feb 2004, Youness El Andaloussi wrote: > I experienced similar problems too with a 4 chan tdm400. This seems to > especially happen when you make configuration changes. It has nothing to do > with runing X or no, it does not even have to do with redhat... I > experienced the same problem on mandrake. > > One thing you have to be extra careful is when restarting, make sure that > all the modules have entirely reloaded before expecting a dialtone with an > asterisk debug console "asterisk -rvvvv"... many of the times I thought > there was no dialtone and the asterisk process had gone cukoo, I noticed > that configuration was not entirely reload. > > Yet, reloading many times seems to get some of the TDM400 channels > hung. On the other hand, this problem does not seem to happen as > extensively when no reloads are made > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
