I had a very strange problem with a Sangoma card that I had both Sangoma (about 3 hours) and Digium (about 2 hours) look at. When I got a different Sangoma tech to look at the problem it went away. I told the tech he did something and he said I alway verify the firmware on the card is updated and as it was not I updated it. That fixed the problem.
This system had worked before a dahdi update was applied. Bottom line make sure you have the most current firmware for your card. -- Jim Dickenson mailto:[email protected] CfMC http://www.cfmc.com/ On Jul 8, 2011, at 2:49 PM, [email protected] wrote: > I am still having major issues with dtmf recognition. My setup is Polycom end > points. Tried this with different models, firmware and cfgs. Outbound calls > are not going out reliably. Phones are set to rfc2833. I have had sangoma and > elastix support look at it.. No better. Running asterisk 1.8.4. What am I > missing? Any help appreciated.. Btw.. Used a basic test set and dialed out on > all lines no problem. Sangoma card is a a400 with echo cancel. > > > Sent from my android device. > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
