In asterisk CLI do "pri show spans". The fact the card is in RED alert means the hardware does not "see" the pri line connected to the card. -- Jim Dickenson mailto:[email protected]
CfMC http://www.cfmc.com/ On May 11, 2011, at 6:55 PM, Nicolas Ross wrote: > Le 2011-05-09 09:31, Jim Dickenson a écrit : >> Make sure the firmware on the card is latest. I had a problem, not like >> your, and flashing the card to the latest firmware resolved it. > It appears it did not change anything... > > So, to re-cap, I have a sangoma A101 card, with the firmware uptodate, on the > asterisk 1.8.3.3, dahdi-linux 2.4.1.2, and dahdi-tools 2.4.1. > > When asterisk is running, cat /proc/dahdi/1 yields : > > Span 1: WPT1/0 "wanpipe1 card 0" (MASTER) B8ZS/ESF RED > > 1 WPT1/0/1 Clear (In use) > 2 WPT1/0/2 Clear (In use) > (...) > 24 WPT1/0/24 Hardware-assisted HDLC (In use) > > And when it's not, the (In use) go away. > > When, dialing I get "Unable to create channel of type 'DAHDI' (cause 34 - > Circuit/channel congestion)" > > So, does anybody got any idea ? > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
