Hi Matt,
I did try setting my sip.conf to have host=ip.address. such as the following:
[DavidLiu] type=friend username=DavidLiu secret=mypassword host=192.168.3.16 canreinvite=yes dtmfmode=rfc2833 context=sip callerid="David Liu" <1000> mailbox=1000 port=5060
Then asterisk will complain with the following error:
Feb 5 09:52:01 NOTICE[278546]: Registration from '"DavidLiu"
<sip:[EMAIL PROTECTED]>' failed for '192.168.3.16'
Feb 5 09:52:32 NOTICE[278546]: Peer 'DavidLiu' isn't dynamic
Feb 5 09:52:32 NOTICE[278546]: Registration from '"DavidLiu"
<sip:[EMAIL PROTECTED]>' failed for '192.168.3.16'
Feb 5 09:52:33 NOTICE[278546]: Peer 'DavidLiu' isn't dynamic
etc......(repeat until phone stops registering)
You have been bitten by the pure EVIL nature of a type=friend. You need to use seperate type=user's and type=peer's
This is all you need:
[DavidLiu] type=user secret=mypassword context=sip mailbox=1000
[DavidLiu] type=peer secret=mypassword host=dynamic context=sip callerid="David Liu" <1000> mailbox=1000
Jeremy McNamara
----- Original Message -----
From: "mattf" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, February 04, 2004 3:59 AM Subject: RE: [Asterisk-Users] Minor Registration Problem With Polycom Soundpoint IP 500
What firmware and sip versions are you using? I have several Polycomphones
Soundpointon my system right now and I've never had any registration problems with them.
Instead of leaving the host as dynamic try declaring an IP address(that's the only difference I see between your sip.conf and mine).
If you are still having problems I've like to see your polycom .cfg files for one of these phones, you might be missing a setting in one of them.
MATT---
-----Original Message-----
From: David Liu [mailto:[EMAIL PROTECTED]
Sent: Wednesday, February 04, 2004 1:06 AM
To: [EMAIL PROTECTED]
Subject: [Asterisk-Users] Minor Registration Problem With Polycom
IP 500Unable
We recently took a few Polycom Soundpoint IP 500 to test out in Asterisk environment. So far it has been good. Call Hold, Transfer, DMTF etc.
However, I do notice every now and then the Polycom fails to register with Asterisk. Asterisk console outputs the following:
Feb 3 13:02:32 WARNING[278546]: chan_sip.c:2365 __transmit_response:
attemptto determine sequence number from '' Feb 3 13:02:34 NOTICE[278546]: chan_sip.c:5125 handle_request: Failed to authenticate user "DavidLiu" <sip:[EMAIL PROTECTED]>;tag=9F67E426-59D92ED7 Feb 3 13:02:36 NOTICE[278546]: chan_sip.c:5125 handle_request: Failed to authenticate user "DavidLiu" <sip:[EMAIL PROTECTED]>;tag=BFDEF35B-1CBC4F2C
in sip.conf: canreinvite=yes host=dynamic canreinvite=yes dtmfmode=rfc2833 context=sip port=5060
Usually say after the phone failed to register with Asterisk, I can
to place a call. It will fail of course. But then I can try callingagain
and usually the call will go through and it will successfully re-register itself without needing a restart.
What can this be? Surely Polycom is re-registering every 3600 before Asterisk times it out. But Asterisk is just refusing it.
By the way, anyone know whether Asterisk is geared towards RFC3261 or RFC2543? I know Asterisk is not a fully SIP Proxy but lets say if a SIP PSTNGW or a SIP phone is designed under the spec 2543 as suppose to 3261, will it work better or the same with Asterisk?
David
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
