On 11/26/2010 05:05 AM, Olivier wrote: > Hi, > > On a Lenny system, with dahdi 2.4.0, libpri 1.4.11.5 and asterisk > 1.6.1.18, I inserted a new Digium HA8 + B400M card. > My usual installation fails. > > > I can see it listed : > # lspci -n | grep d161 > 01:0b.0 0200: d161:8007 (rev 11) > > # lspci -vn > 01:0b.0 0200: d161:8007 (rev 11) > Subsystem: d161:8007 > Flags: medium devsel, IRQ 22 > I/O ports at d400 [size=256] > Memory at fe5fe800 (32-bit, non-prefetchable) [size=1K] > Expansion ROM at 20020000 [disabled] [size=128K] > Capabilities: [c0] Power Management version 2 > Kernel modules: wctdm24xxp > > # lsdahdi > # modprobe wctdm24xxp > # dahdi_genconf -v modules > Default parameters from /etc/dahdi/genconf_parameters > Generating /etc/dahdi/modules > # cat modules > # Autogenerated by /usr/sbin/dahdi_genconf (Dahdi::Config::Gen::Modules) > on Fri Nov 26 12:02:11 2010 > # If you edit this file and execute /usr/sbin/dahdi_genconf again, > # your manual changes will be LOST. > wctdm24xxp > # dahdi_genconf -v system > Default parameters from /etc/dahdi/genconf_parameters > Empty configuration -- no spans > Generating /etc/dahdi/system.conf > > > Is there something I could do to change this ?
Does the "modprobe wctdm24xxp" command complete successfully? Is there anything in dmesg or in the output of dahdi_scan after loading the driver? Cheers, Shaun -- Shaun Ruffell Digium, Inc. | Linux Kernel Developer 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA Check us out at: www.digium.com & www.asterisk.org -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
