On Fri, Nov 12, 2010 at 10:17 AM, Ernie Dunbar <[email protected]> wrote:
> that goes from port 4 on the live server to port 1 on the backup server.
> In /etc/asterisk/chan_dahdi.conf:
>
> group=4
> context=local
> switchtype = national
> signalling = pri_cpe
> channel => 73-95
> context = default
> group = 63
What is the configuration on the backup server? One side needs to act
as the network side with signalling=pri_net
> In /etc/asterisk/extensions.conf:
>
> exten => _*88,1,Dial(DAHDI/g4/123456789)
>
> However, in the Asterisk console, I get this error on the live server:
>
> -- Executing [...@lightspeedout:1] Dial("SCCP/lightspeed7-00000062",
> "DAHDI/g4/123456789") in new stack
> [Nov 12 09:24:41] WARNING[1970]: app_dial.c:1286 dial_exec_full: Unable to
> create channel of type 'DAHDI' (cause 0 - Unknown)
> == Everyone is busy/congested at this time (1:0/0/1)
> == Auto fallthrough, channel 'SCCP/lightspeed7-00000062' status is
> 'CHANUNAVAIL'
What is the output of 'pri show spans' or 'dahdi show channels'?
Specifically does Asterisk recognize the channels as up/active an In
Service.
-Jonathan
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
