Hi, I have just set up Asterisk to use an E1 line with a Digium card. And I can call both in and out, but my outgoing line is all ways identifying itself as the same number, and i can't even change it to another number in the same number series.
Do anyone have some clue on how to fix this. I'm using Asterisk 1.6.2.13, libpri 1.4.11.4 and DAHDI 2.4.0. /etc/dahdi/system.conf: span=1,1,0,ccs,hdb3,crc4 # termtype: te bchan=1-12 unused=13-15,17-31 dchan=16 echocanceller=mg2,1-12 # Global data loadzone = no defaultzone = no /etc/asterisk/chan_dahdi.conf [trunkgroups] trunkgroup => 1,16,31 spanmap => 1,1,1 [channels] context=incoming usecallerid=yes callwaiting=no usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes usecallerid=yes callerid=asreceived usecallingpres=yes callgroup=1 switchtype = euroisdn signalling = pri_cpe group = 1 channel => 1-12 Best regards, Kent Varmedal -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
