|
Hi list,
I'm having trouble with DTFM tones detection. Usually, some tones are being received duplicated in Asterisk, some not. As you can imagine, that's a very big problem involving IVR menu options, Meetme conferences protected with passwords, and so on. We are currently using DAHDi 2.2.0.2, module wct4xxp, which is managing a Digium TE220B card, with a hardware echo canceller attached (VPM450). Our service is provided by 2 ISDN E1 PRI circuits (Telefonica): [ 17.188727] Found a Wildcard: Wildcard TE220 (4th Gen) [ 17.188727] TE2XXP: Launching card: 0 [ 17.188727] TE2XXP: Setting up global serial parameters [ 17.687422] About to enter spanconfig! [ 17.687422] Done with spanconfig! [ 17.687422] About to enter spanconfig! [ 17.687422] Done with spanconfig! [ 17.687422] dahdi: Registered tone zone 6 (Spain) [ 17.687422] About to enter startup! [ 17.687422] TE2XXP: Span 1 configured for CCS/HDB3/CRC4 [ 17.687422] wct2xxp: Setting yellow alarm on span 1 [ 17.687422] timing source auto card 0! [ 17.687422] SPAN 1: Primary Sync Source [ 17.687422] timing source auto card 0! [ 17.699422] VPM400: Not Present [ 17.719825] firmware: requesting dahdi-fw-oct6114-064.bin [ 17.731424] VPM450: echo cancellation for 64 channels [ 23.794606] VPM450: hardware DTMF disabled. [ 23.794610] VPM450: Present and operational servicing 2 span(s) For example, when I press 0180... I get this on Asterisk (as you can see, number 1 is duplicated): [Jun 17 12:39:05] VERBOSE[1935] logger.c: << [ TYPE: DTMF End (1) SUBCLASS: 0 (48) ] [DAHDI/6-1] [Jun 17 12:39:06] VERBOSE[1935] logger.c: << [ TYPE: DTMF End (1) SUBCLASS: 1 (49) ] [DAHDI/6-1] [Jun 17 12:39:06] VERBOSE[1935] logger.c: << [ TYPE: DTMF End (1) SUBCLASS: 1 (49) ] [DAHDI/6-1] [Jun 17 12:39:07] VERBOSE[1935] logger.c: << [ TYPE: DTMF End (1) SUBCLASS: 8 (56) ] [DAHDI/6-1] [Jun 17 12:39:08] VERBOSE[1935] logger.c: << [ TYPE: DTMF End (1) SUBCLASS: 0 (48) ] [DAHDI/6-1] Our telco provider has told us that signalling is sent via inband mode, so I've messing with "toneduration", "relaxdtmf" parameters on chan_dahdi.conf, but I don't get better results... As I have read in Asterisk lists the echo canceller module can be configured to detect DTMF tones via hardware, but it's disabled by default. Maybe activating it I'll get an improvement on DTMF detection? Or should I check other configuration choices? Any help would be appreciated :) Thanks in advance, David --
This information is private and confidential and intended for the recipient only. If you are not the intended recipient of this message you are hereby informed that you shall notify the sender immediately and delete the message. Dissemination, distribution or copying of this message is strictly prohibited. OPTENET, S.A. is entitled to complete the corresponding legal actions against people that access unlawfully to the content of the messages that have been sent from any of the companies within the structure of OPTENET, S.A. This communication is for information purposes only and should not be regarded as an official statement from OPTENET, S.A. Email transmission cannot be guaranteed to be secure. Therefore, we do not represent that this information is complete or accurate and it should not be relied upon as such. All information is subject to change without notice. This email has been scanned by our Antivirus system. | |||||||||||||||
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello
asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
