----- "Sean Brady" <[email protected]> wrote: > > ----- "--[ UxBoD ]--" <[email protected]> wrote: > > > > ----- "--[ UxBoD ]--" <[email protected]> wrote: > > > > > > > Hi, > > > > > > > > we are running Asterisk 1.6.1.14 and have a issue that when we > use > > > > followme the call is correctly placed to the mobile phone, the > > > mobile > > > > rings, but when answered we do not hear the normal followme > > > > introduction message. If we press 1 to accept there is just > > > silence. > > > > Has anybody else seen this issue before ? > > > > > > > Ran a tcpdump against the session this morning and all SIP > packets > > > look fine. If I phone the mobile without using followme, so go > > > direct, all is okay. Any ideas please ? > > > > > > Ran a full trace against the issue and I see that SIP is established > between the PBX and the mobile phone, but at that >point no RTP > packets are sent. We are using NAT but the firewall takes care of > that and the session state. I have >checked all the SIP packets and > both the header and payload contains our public IP. > >-- > >Thanks, Phil > > > > I am seeing the exact same behavior on 1.6.2.5. Could this have > anything to do with issue #16816? I'm no developer here, the reason > that I think it might be related is that both apps depend on the > second leg of the call to be answered, and it appears that for some > reason the apps don't think that the answer has occurred. > > Please let me know what you would like to see from debugging, > messages, etc. if you need more information. >
Please try the patch here as it worked for me :- https://issues.asterisk.org/view.php?id=16929 -- Thanks, Phil -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
