----- "Tri Tu" <[email protected]> wrote:
RTP is only firewall issue. Make sure that you can pass traffic from your client to the asterisk server. If it's on the same LAN, there shouldn't be any issue with RTP unless the Asterisk is setup with firewall to block RTP traffic (default is from 10000 - 20000 upd) Asterisk doesn't support G29 (pass-through is OK) but if you want to connect from your client to asterisk server with G729, you need to buy license. Using G711 is free and it taking about 68kbp. From: Peter Serwe <[email protected]> To: [email protected] Sent: Sat, February 27, 2010 12:42:56 PM Subject: [asterisk-users] No RTP from asterisk? I've got an asterisk installation of 1.4.30-RC2 running, and while I can register lines and get call setup to pass, for some reason no RTP is being generated or received by asterisk. Debug doesn't seem to give me too much of relevance about it, especially rtp debug. I had a few other small issues, like trying to negotiate G729 when it's not capable, but since then, I've changed everything back to G711. I have connected to it, a SIP trunk, 3 registered users and I'm at a loss as to how to troubleshoot this further. Can anyone point me in the right direction? Peter -- Thanks, Phil http://issues.asterisk.org/view.php?id=16929
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
