That document certainly is informative, thanks. I actually went with a tn464F that I happen to have and from the lucent side I have no problem setting it up as a signaling trunk group. Asterisk starts up, registers 1 D-Channel, and 23 B-Channels, but thats as far as I get.
When I try to dial the asterisk via the Feature access code I defined on the definity I don't get any sign of a connection. The definity dials, and then waits until timeout at which point I get a busyback. Similarly, if I try to dial out from the Asterisk I get an all busy. I turned on pri intense debug span 1, to see if there were any obvious errors. When I do a dial I get the following traceback:
---- start incredibly long debug message ------
Here's some more reading and also a great refernece to have.... (Just as soon as I can figure it out, that is) You can go to the ITU electronic book store and download up to 3 recommendations free of charge, I'd grab Q.850 , Q.921, Q.931 You have to register first at...
http://ecs.itu.ch/cgi-bin/dms-ebookshop
then download from here....
http://www.itu.int/rec/recommendation.asp?type=products&lang=e&parent=T-REC-Q
From the little I understand.... ISDN Malfunction (81)Invalid Call reference (out of parameters) (5)Miss Dialed trunk prefix
Someone should know what all this means, I really don't have any idea, Still digging myself, through tons of info/implemention manuals/etc.
Just getting ready to purchase my TN767 or TN464.
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
