On Thu, Feb 11, 2010 at 06:20:54PM +1100, Lee, John (Sydney) wrote:
> Just to share some experience with everyone about what happened today to
> our Asterisk 1.4 box with Digium TE412P card.
>
> We had an unscheduled power outage which shut down the Asterisk box.
> When the power went up, Asterisk came back up okay but the ports on the
> card were all red. Zttool show red alarm and cat /proc/zaptel/1 show
> red alarm today.
What is the output of 'cat /proc/dahdi/1' ?
What do you have in /etc/zaptel.conf ?
>
> Both incoming and outgoing cannot be made.
> When a outgoing call was made, we got the following error message:
> app_dial.c: Unable to create channel of type 'Zap' (cause 34 -
> Circuit/channel congestion)
>
> We suspect it was the ISDN line problem and so we waited a whole day for
> the engineer to arrive. He plugged an ISDN phone into the line and
> found it was working because he could call out.
>
> We are perplexed and thought about replacing the Digium card. We ended
> up just re-seating the card and lo and behold, everything was hunky dory
> after re-seating.
--
Tzafrir Cohen
icq#16849755 jabber:[email protected]
+972-50-7952406 mailto:[email protected]
http://www.xorcom.com iax:[email protected]/tzafrir
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
