Thank you, at least I am getting the same thing. Mike > -----Original Message----- > From: [email protected] [mailto:asterisk-users- > [email protected]] On Behalf Of Jim Dickenson > Sent: Friday, December 04, 2009 16:37 > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [asterisk-users] DAHDI outgoing > > On my * 1.6.0.13 box I see this: > > dahdi show channels > > Chan Extension Context Language MOH Interpret Blocked > State > pseudo nonesaid en default > In Service > 1 4151111111 from-outside en default > In Service > 2 from-outside en default > In Service > 3 from-outside en default > In Service > 4 from-outside en default > In Service > 5 from-outside en default > In Service > 6 from-outside en default > In Service > 7 from-outside en default > In Service > 8 from-outside en default > In Service > 9 from-outside en default > In Service > 10 from-outside en default > In Service > 11 from-outside en default > In Service > 12 from-outside en default > In Service > 13 from-outside en default > In Service > 14 from-outside en default > In Service > 15 from-outside en default > In Service > 16 from-outside en default > In Service > 17 from-outside en default > In Service > 18 from-outside en default > In Service > 19 from-outside en default > In Service > 20 from-outside en default > In Service > 21 from-outside en default > In Service > 22 from-outside en default > In Service > 23 from-outside en default > In Service > > In this case I had an inbound call to one of my DID numbers for this PRI > line. It showed the DID on the port 1 line. If I made an outbound call > nothing showed for the port used. To see that I needed to do the command > "core show channels" and then I saw this for the outbound channel in use: > > DAHDI/23-1 (None) Up AppDial((Outgoing Line)) > > I do not see a way to do any summary reports directly in CLI. > -- > Jim Dickenson > mailto:[email protected] > > CfMC > http://www.cfmc.com/ > > > > On Dec 4, 2009, at 11:51 AM, Mike wrote: > > > Or am I misunderstanding the displayed information? What I was looking > for was a list of channels that shows which one is currently busy, and > ideally also a way to know how many channels are used per span (although I > could work it out from the former if it was available) > > > > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
