Hi, I'm running a simple test from asterisk towards a public telco switch (AXE10) over E100P.
Here is the test case: 1) 30 calls are setup simultainously, 20 sec ringing time. 2) no calls answers (just calling a vacant public tax office :=) 3) Each channel will continue on its own with the same proceedure: ring for 20 sec, then hangup, ring for 20 sec, and so on. Of course this leads to massive signalling on the D-channel. Result: After one or two minutes, the number of acks from the public switch dropps sharply. At the end there are only messages in one direction (from asterisk to public switch), except for some RNR (Receiver Not Ready) message from public switch. This leads of course to T200 timeouts, which very soon hits 3, and the D-channe is reset (and all calls terminated). I can not see any weird behaviour from asterisk. When RNR is received, it stops sending setup messages to the far end. Which is correct. We have managed to agree on a test session with the telco, but first I would like to know if anyone else has experienced this. Knut Bakke. __________________________________ Do you Yahoo!? Yahoo! Hotjobs: Enter the "Signing Bonus" Sweepstakes http://hotjobs.sweepstakes.yahoo.com/signingbonus _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
