Thorolf, In the [general] section of sip.conf, set the 'bindaddr' parameter to the cluster IP. If Asterisk is only bound to the floating interface, it will respond only from that source IP.
-- Alex Thorolf Godawa wrote: > Hi all, > > I installed a Linux-HA-cluster with DRBD and Asterisk 1.4 on it. > > Actually it might work quite good, failover etc. works, even if this is > not a 0-downtime solution, because current calls are dropped and the > phones not are reachable until they reregister at the Asterisk. > > It "might" work good, because my phones are not able to register at the > cluster-ip address, because the REGISTER arrives at the cluster-ip, > while Asterisk responds from the real host-ip of the active cluster-node. > > The registration with the real ip works, but then I can't use any > failover solution. > > I have already checked several solutions found at > http://www.voip-info.org/wiki/view/Asterisk+High+Availability+Solutions > and some others returned by searching the net, but nothing that helped > me out. > > I see three possible solutions: > - is there a parameter in Asterisk to set the source-ip? > - patching Asterisk to include such a parameter? > - would be changing the primary ip-address to the "cluster"-ip and > changing the "real" host-ip to an alias, a good solution? > > Thanks for any hints in advance, -- Alex Balashov - Principal Evariste Systems Web : http://www.evaristesys.com/ Tel : (+1) (678) 954-0670 Direct : (+1) (678) 954-0671 _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
