----- Original Message ----- From: "Barton Fisher" <[email protected]> To: "Asterisk Users Mailing List - Non-Commercial Discussion" <[email protected]> Sent: Wednesday, October 07, 2009 18:25 Subject: [asterisk-users] DTMF Issues
>I have a block of DID's that I ported to Vitelity about 7 days ago. The > problem is if a POTS caller dials into the system, his dtmf is not heard > at READ() or Background() while a prompt is played. After the prompt is > finished, then dtmf is heard. I've been working with their support, but > it still not resolved. SIP callers are not effected. > > Yesterday, I purchased a DID from Flowroute. The setting are the same > as Vitelity. And amazingly, this DID works perfectly. This to me would > indicate the problem whatever it is, is Vitelity or its upstream > provider. - Am I right here?? > > Also, I have other DID blocks that have been with Vitelity for a while > that do not have this issues. I'm told the upline carrier is the same. > > So I'm reaching out to you guys to give me ideas of what could be > causing the problem and how I can resolve > > Thanks, Bart > Enable dtmf under full in logger.conf do tail -f /var/log/asterisk/full, call in and enter some DTMF. If you see that it is delayed chances are it is your carrier. Also what are you using for DTMF (rfc2833, Inband etc.) ? _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2009 - October 13 - 15 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
