On Wed, 2004-01-14 at 13:26, Jorge Mendoza wrote:
Hi,
A customer has an old PBX, which accept only T1 (not PRI) trunks. The local telco only provides Euro PRI. Could the following config works?:
[telco] <-- E1 PRI --> [Asterisk] <-- T1 --> [PBX]
Many thanks for your time
Yes it can. You should be able to provide CallerID and DID support to
the old PBX too.
BTW, are you sure it accepts T1 in a location the provides E1 PRI? If so
be aware you need the TE410P card and all the motherboard troubles that
may entail.
Yes I'm sure. We imported and installed the PBX more than 15 years ago when the telco had not digital CO trunk to offer to their customers. The T1 were used as tie lines for they private network. However in our country the public interconnection standars are european.
Reason: prices, E1 PBX version were a lot more expensive at that time.
My concern is reliability. The communication with the outside world will depends on *.
Thank You Steven for your advise.
Jorge
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
