At 12:33 AM 7/3/2009, you wrote: >On Thu, Jul 02, 2009 at 08:15:37PM -0700, Ira wrote: > > my DAHDI lines work with incoming calls, but I can't make an outgoing > > call on a DAHDI line. > > > > The simplest line is: > > exten=> s,1, dial(DAHDI/1) > >Extra space?
Not in extensions.conf that I can see. > > which says it can't create a DHADI channel and gives an unknown error 0. > >astertisk -rx 'dahdi show channels' shows channels 1,2 and 4 all In Service with the proper contexts and channel numbers >cat /proc/dahdi/* Shows 4 lines, 3 In use looking like: 1 WCTDM/4/0/ FXSKS (In use) (SWEC: MG2) I thought it should be using HPEC as I have 4 licenses and that what I set it to, but checking system.conf shows I need to change it. And restarting now shows HPEC as it should. 1 WCTDM/4/0/ FXSKS (In use) (SWEC: HPEC) > > Dahdi is using a TDM400 with 4 FXO modules. The messages at boot time > > seem correct and "dahdi show channels" seems to indicate all three > > dahdi channels I use are present and working. > >What happens if you call in first? Now wonder it worked the first time I tested it. Yes, if a call comes in after a re-start it seems to work there after. Thanks so much for helping. Ira _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
