On Mon, 2009-06-22 at 10:58 -0400, David Backeberg wrote: > On Sat, Jun 20, 2009 at 8:15 PM, John A. Sullivan > III<[email protected]> wrote: > > Hello, all. I've been playing with MeetMe and talker optimization > > seemed like a great idea. I activated it as follows: > > exten => 201,1,MeetMe(100201,cTo) > > No one can hear the talker. It doesn't matter how loudly the talker > > shouts! Is there something else I'm supposed to do to enable this? I am > > Assuming that you don't have any other problems, as in a call between > these parties outside of meetme, like with a Bridge() works just fine, > you could have some problems specific to optimization. Specifically, > look at dsp.conf and try tuning your silence threshold. If this is SIP > I also recommend disabling vad / silence suppression. > > In my experience, I had a lot of trouble with talker optimization and > I turned it off completely. If you read the archives from the last few > weeks you'll see further pointers I made on this topic, as well as > links to a lengthy bugs.digium.com discussion on talker optimization. <snip> These are SIP connections so silence suppression may be the problem. I did also notice the threads and issues about talker optimization. I was hoping those were resolved in 1.6.1.1 - perhaps a bit naive. Thanks - John -- John A. Sullivan III Open Source Development Corporation +1 207-985-7880 [email protected]
http://www.spiritualoutreach.com Making Christianity intelligible to secular society _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
