[general]
context=default                 ; Default context for incoming calls
                                ; instead of the From: field.
allowoverlap=no                 ; Disable overlap dialing support. (Default is yes)
                                ; Set this to your host name or domain name
bindport=5060                   ; UDP Port to bind to (SIP standard port for unencrypted UDP 
                                ; and TCP sessions is 5060)
                                ; bindport is the local UDP port that Asterisk will listen on
bindaddr=0.0.0.0                ; IP address to bind UDP listen socket to (0.0.0.0 binds to all)
tcpenable=no                    ; Enable server for incoming TCP connections (default is no)
tcpbindaddr=0.0.0.0             ; IP address for TCP server to bind to (0.0.0.0 binds to all interfaces)
                                ; Optionally add a port number, 192.168.1.1:5062 (default is port 5060)


srvlookup=yes                   ; Enable DNS SRV lookups on outbound calls
                                ; Message-Account in the MWI notify message 
                                ; defaults to "asterisk"
disallow=all                   ; First disallow all codecs
allow=ulaw                     ; Allow codecs in order of preference
                                ; Note that promiscredir when redirects are made to the

[basic-options](!)                ; a template
        dtmfmode=rfc2833
        context=from-office
        type=friend

[natted-phone](!,basic-options)   ; another template inheriting basic-options
        nat=yes
        canreinvite=no
        host=dynamic

[public-phone](!,basic-options)   ; another template inheriting basic-options
        nat=no
        canreinvite=yes

[my-codecs](!)                    ; a template for my preferred codecs
        disallow=all
        allow=ulaw
        ;allow=ilbc
        ;allow=g729
        ;allow=gsm
        ;allow=g723

[ulaw-phone](!)                   ; and another one for ulaw-only
        disallow=all
        allow=ulaw

[100]
; Turn off silence suppression in X-Lite ("Transmit Silence"=YES)!
; Note that Xlite sends NAT keep-alive packets, so qualify=yes is not needed
type=friend
context=outgoing
regexten=100                   ; When they register, create extension 1234
callerid="Wilson Abigaba" <100>
host=dynamic                    ; This device needs to register
nat=yes                         ; X-Lite is behind a NAT router
secret=wilson
canreinvite=no                  ; Typically set to NO if behind NAT
disallow=all
allow=ulaw
;allow=alaw
;mailbox=1234@default,1233@default ; Subscribe to status of multiple mailboxes
registertrying=yes              ; Send a 100 Trying when the device registers.

[101]
type=friend
context=outgoing
host=172.17.10.150
;allow=gsm
disallow=all
allow=ulaw
;allow=alaw
nat=no
canreinvite=yes
qualify=yes
callerid="Cisco" <101>

[102]
type=friend
context=outgoing
host=172.17.3.248
;allow=gsm
disallow=all
allow=ulaw
;allow=alaw
nat=no
canreinvite=yes
qualify=yes
callerid="Cisco VG" <102>

[103]
type=friend
context=outgoing
host=172.17.3.249
;allow=gsm
disallow=all
allow=ulaw
;allow=alaw
nat=no
canreinvite=yes
qualify=yes
callerid="Cisco VG" <102>
