On Thu, May 14, 2009 at 12:17:47PM +1000, Paul Hales wrote: > > I think you have your line types mixed up - FXS is for phones, FXO is > for lines.
sorry why do you think that, I have 3 fxs + 1 fxo (my understanding is that a attached fxs presents internally as a fxo I have a pstn line attached to the FXO and I have my pabx attached to 2 FXS ports, which signal as fxo into asterisk (I could be wrong about that). > > An analogue passthorugh setup _is_ doable, just not overly recommended. > > PaulH > > > Alex Samad wrote: > > Hi > > > > I am in the middle of move a small business over from legacy PABX + PSTN > > lines to VOIP infrastructure. > > > > I borrowed a spa9000 to place between the PABX and the PSTN lines. I > > have had this going for a while (>5 months) and it has been working fine > > (some issues with echo and other minor things), which is why I am moving > > to asterisk. > > > > I bought a tdm410 with 3 fxo + fxs. The fxs is connected to a fax line > > and used just in case the internet connection is down. > > > > I have tested the pstn line connection with a soft phone and it seems to > > be working fine. I need some help on how to tell asterisk to ignore the > > line for incoming ! > > > > when I connect the PABX to the FXO ports I ran into a problem. > > > > It seems to register okay, I pick up the handset on the pabx and select > > line 1 and i can hear a dial tone (same with line2) - this is the same > > what I get on the spa9000. Asterisk tells me ZAP/1-1 and ZAP/2-1 are in > > use. > > > > But I can't hear anything from the pabx - no dtmf tones and thus can't > > dial! > > > > when I try dialing in from the internet to asterisk then to ZAP/g1 the > > pabx can see the ring and I can pick up the phone I can hear the other > > end, but they can't hear me. > > > > I don't believe its a firewall issue as I can't dial from the pabx > > > > okay some print outs > > > > # zaptel_hardware > > pci:0000:05:02.0 wctdm24xxp+ d161:8005 Wildcard TDM410P > > > > # ztcfg -vv > > > > Zaptel Version: 1.4.11 > > Echo Canceller: MG2 > > Configuration > > ====================== > > > > > > Channel map: > > > > Channel 01: FXO Kewlstart (Default) (Slaves: 01) > > Channel 02: FXO Kewlstart (Default) (Slaves: 02) > > Channel 03: FXO Kewlstart (Default) (Slaves: 03) > > Channel 04: FXS Kewlstart (Default) (Slaves: 04) > > > > 4 channels to configure. > > > > # cat /etc/zaptel.conf > > fxsks=4 > > fxoks=1,2,3 > > > > loadzone=au > > defaultzone=au > > > > /etc/asterisk/zapata.conf > > ======================== > > # grep -v '^ *;' /etc/asterisk/zapata.conf | grep -v '^$' > > [trunkgroups] > > [channels] > > context=default > > switchtype=national > > signalling=fxo_ks > > rxwink=300 ; Atlas seems to use long (250ms) winks > > usecallerid=yes > > hidecallerid=no > > callwaiting=yes > > usecallingpres=yes > > callwaitingcallerid=yes > > threewaycalling=yes > > transfer=yes > > canpark=yes > > cancallforward=yes > > callreturn=yes > > echocancel=yes > > echocancelwhenbridged=yes > > rxgain=0.0 > > txgain=0.0 > > group=1 > > callgroup=1 > > pickupgroup=1 > > immediate=no > > usecallerid=yes > > hidecallerid=no > > callwaiting=yes > > threewaycalling=yes > > transfer=yes > > echocancel=yes > > echocancelwhenbridged=yes > > rxgain=0.0 > > txgain=0.0 > > Group=1 > > signalling=fxo_ks > > context=in-pbx > > channel=1-2 > > Group=2 > > echocancel=yes > > signalling=fxs_ks > > context=in-pstn > > channel=4 > > Group=3 > > signalling=fxo_ks > > context=in-spare > > channel=3 > > > > > > the thing that has me beet is that it work with the spa9000 I would > > expect it to just sort of work with the digium card. > > > > the os is debian amd64 2.6.26 > > #dpkg -l asteri* | grep ^ii > > ii asterisk 1:1.4.21.2~dfsg-3 > > Open Source Private Branch Exchange (PBX) > > ii asterisk-barbarast.com 0.0.0-1 > > asterisk setup for hme1.samad.com.au > > ii asterisk-doc 1:1.4.21.2~dfsg-3 > > Source code documentation for Asterisk > > ii asterisk-sounds-extra 1.4.7-1 > > Additional sound files for the Asterisk PBX > > ii asterisk-sounds-main 1:1.4.21.2~dfsg-3 > > Core Sound files for Asterisk (English) > > > > #dpkg -l zapt* | grep ^ii > > ii zaptel 1:1.4.11~dfsg-3 > > zapata telephony utilities > > ii zaptel-modules-2.6.22-2-amd64 1:1.4.11~dfsg-3+2.6.22-4 > > zaptel modules for Linux (kernel 2.6.22-2-am > > ii zaptel-modules-2.6.26-2-amd64 > > 1:1.4.11~dfsg-3+2.6.26-15 zaptel modules for Linux (kernel 2.6.26-2-am > > ii zaptel-source > > > > > > thanks > > Alex > > > > > > ------------------------------------------------------------------------ > > > > _______________________________________________ > > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > > > asterisk-users mailing list > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > -- "I got to know Ken Lay when he was head of the What they call the Governor's Business Council in Texas. He was a supporter of Ann Richards in my run in And she had named him the head of the Governor's Business Council. And I decided to leave him in place, just for the sake of continuity. And that's when I first got to know Ken and worked with Ken." - George W. Bush 01/10/2002 Washington, DC attempting to distance himself from his biggest political patron, Enron Chairman Ken Lay, whom he nicknamed Kenny Boy
signature.asc
Description: Digital signature
_______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
