2009/5/7 Jim Dickenson <[email protected]> > I have * 1.6.0.9 with dahdi-linux 2.1.0.4, dahdi-tools 2.1.0.2, libpri > 1.4.10 and wanpipe-3.4.1 running on CentOS 5.3 64bit. > > I have 2 ports of the a104d configured for use with PRI lines and 2 ports > configured for use with Adtran Total Access 850 channel banks. The channel > banks have 6 four port FXS cards in them. > > The PRI lines work as expected. > > I can call a phone connected to the channel bank and this works as > expected. > > If I pick up the phone connected to the channel bank and dial a digit I > immediately get a fast busy tone. The exceptions is that if I dial > *7<anything> then I can dial these three keys. Nothing of much interest > shows on the * console other then when I hang up the phone this event is > reported. > > If while talking on the phone when someone calls me, I press a key on the > phone connected to the channel bank, the person called hears a faint pop > and > then the pressed dtmf tone. > > Any ideas as to what might cause this behavior? > > Thanks for any ideas! > -- > Jim Dickenson > mailto:[email protected] > > CfMC > http://www.cfmc.com/ >
Look if your channel bank dont have any fancy dialplan configured.
_______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
