This is what I derive from your emails so far: 1. Asterisk is up and running 2. you have two SIP Peers that are running but not registered (sip show peers shows not monitored, phones don't go off-hook, dialtone) 3. I've experienced similar problem with a X-Lite softphone. When the phone properly registers with Asterisk, you will be good to go.
Have you configured the phones to register with your Asterisk? (ID, password, IP, port?) _____ From: [email protected] [mailto:[email protected]] On Behalf Of jonas kellens Sent: Monday, April 13, 2009 1:47 PM To: [email protected] Subject: Re: [asterisk-users] Asterisk-beginner : cannot make phonecalls using Asterisk Barry, there is a 'send' button but pushing it before or after dialing '211' does not really change anything... I get no dial tone, no ring tone on the other phone and no output on the Asterisk CLI... I thought this would go easier... Don't know what is going on here. I followed the book "Asterisk, the future of telephony"... Thanks for your reply ! Greetingz, Jonas. On Mon, 2009-04-13 at 14:04 -0400, Barry L. Kline wrote: -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 jonas kellens wrote: > I pick up the phone, and dial 211 on the BT201. This is the Asterisk CLI : > > /Connected to Asterisk 1.4.24 currently running on asterisk (pid = 3895)/ > /Verbosity is at least 5/ > /asterisk*CLI> / > > Nothing is displayed... it stays that way... > > Jonas. Is there a "Send" button on that phone? It sounds to me as though the phone is still waiting for more digits. Barry
_______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
