On 2/13/09, Kevin P. Fleming <[email protected]> wrote: > Matt Florell wrote: > > > My understanding is that this setting lets you ignore the timing > > signal coming from the other end of one of the ports, and the card > > will take another timing source from a port that you specify and > > "force" it to be used as a timer on that first port. > > > That is very close to what our cards do, except that it's not > controllable on a port-by-port basis. > > In that situation, which port did you pick as the clock source for the > channelbank port, and what was the clock source for it prior to that?
When I got it working I had set the clock source to the 4th port on the card for the channelbank which was on the first port. We never tried any other ports because I was afraid to touch it after I got it working. Before it was working, we had tried every one of the dozens of combinations of timing settings in zapata.conf for the 4 spans, and none of them worked. As a note, I should mention that this was over 2 years ago. Thanks, MATT--- _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
