I'm trying to figure out how to reload iax2 (without breaking existing calls)
so it can listen on a new IP address (like "ip addr add local ..."). This alias
IP is added/removed by a custom process (script) for clustering purposes.
The iax.conf file contains "bindaddr=0.0.0.0".
I tried a "iax2 reload" (executed without errors or warnings) but I'm still not
able to connect to the alias IP from another Asterisk server within the same
LAN (no firewalls of any type in the middle).
On the other Asterisk server I run a "iax2 show peers" and get "status
UNREACHABLE" for the alias IP trunk (eg. 192.168.250.115 in the example below).
However, if I specify a non-alias IP address on the other server's trunk
settings then a "iax2 show peers" shows a "status OK" (eg. 192.168.250.111 in
the example below).
Just for your information, the IP settings on the server I'm trying to connect
to are:
# ip addr show eth1
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000
link/ether 00:1d:60:b0:25:10 brd ff:ff:ff:ff:ff:ff
inet 192.168.250.111/24 brd 192.168.250.255 scope global eth1
inet 192.168.250.115/24 brd 192.168.250.255 scope global secondary eth1
inet6 fe80::21d:60ff:feb0:2510/64 scope link
valid_lft forever preferred_lft forever
This Asterisk server has version 1.2.30.
The other "connecting" Asterisk server has version 1.4.21.2.
Any ideas as to what I could try?
Vieri
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
